{"id":17029,"date":"2014-06-01T06:00:41","date_gmt":"2014-06-01T11:00:41","guid":{"rendered":"https:\/\/www.scrapbook-adhesives.com\/blog\/?p=17029"},"modified":"2022-10-18T18:06:01","modified_gmt":"2022-10-18T23:06:01","slug":"pink-graduation-card","status":"publish","type":"post","link":"https:\/\/www.scrapbook-adhesives.com\/blog\/2014\/06\/01\/pink-graduation-card\/","title":{"rendered":"Pink Graduation Card"},"content":{"rendered":"

It’s graduation season, and you’re going to need a few cards in your stash. This is a fun pink shaker card that can be customized for the occasion with the stamped sentiments.<\/p>\n

\"Beth<\/a> It’s pretty easy, here’s how I made it, and the adhesives I used:<\/p>\n

\"BethPingry-graduation1\"<\/a>Cut the card base, the cut the patterned paper layer to about 1\/4″ smaller than the base. Use E-Z Dots\u00ae Repositionable Refillable<\/a> to secure the patterned paper to the card. Die cut the shape into both layers of the card, this ensures that the openings will line up later.<\/p>\n

Remove the patterned paper layer, and use Crafty Power Tape<\/a> to secure a piece of clear plastic to the card front, be sure it covers the die cut hole. I used a piece of page protector for my card. Next, cut Crafty Foam Tape<\/a> so that it completely encloses the die cut hole.<\/p>\n

\"BethPingry-graduation4\"<\/a><\/p>\n

Fill the hole with sequins, remove the tape liner and add the second layer of plastic. Add some 3D Foam Squares<\/a> to the rest of the card front – they’re the same height as the Crafty Foam Tape. Add the patterned paper to the card front, lining up the openings.<\/p>\n

\"BethPingry-graduation5\"<\/a>Add glitter to 3D Foam Pennants<\/a> and arrange in the card front. Stamp a sentiment onto a die cut and adhere it with 3D Foam Squares to the card.<\/p>\n

\"BethPingry-graduation3\"<\/a>Thanks for stopping in, and congratulations to all the graduates!<\/p>\n

Beth Pingry<\/a><\/p>\n

I used these Supplies:<\/p>\n