Scrapbook Adhesives by 3L Crafty Power Blog

Holiday Coffee Shaker Card with Coffee Lovers

Posted on November 11, 2022 by Tracy McLennon

Welcome! It’s time for the Fall/Winter 2022 Coffee Lovers Blog Hop with this fabulous Holiday Coffee Shaker Card! As a SUPER SPONSOR, we’ve provided great prizes too! Grab a cuppa and join the hop with your own beverage-themed artwork!

What are Coffee Lovers? It is a coffee-loving (or tea or cocoa) community of cardmakers open to everyone. Their blog offers inspirational coffee-related posts and bi-annual coffee blog hops that YOU can join. You get a chance to win the giveaways as a blogger! So read until the very end!

Holiday Coffee Shaker Card by Tracy McLennon

Hello crafty friends! Tracy here, and today I have a festive and fun little project to share celebrating everything caffeinated. Here are all the details about my coffee-themed shaker card.

Grab Coffee + Let’s Create!

First I decided to create a very simple layered background for my shaker card using a white cardstock card base and patterned paper. I adhered these layers together using the E-Z Runner® Petite Permanent Dots Refillable Dispenser.

Secondly, I stamped and coloured my wreath and coffee image using black ink, Zig Clean Color Markers, and a water brush. I used circle dies to cut the patterned paper circle for the base of the shaker, and the acetate for behind the wreath.

Adhere the acetate to the wreath image using the E-Z Runner® Petite Permanent Dots Refillable Dispenser. Next, add 2 layers of the 3D Foam Circle Frames White to the shaker base. Now the shaker pieces are ready to add the fun bits for the coffee-themed shaker card.

I added a mix of sequins to the shaker frame to coordinate with my card.

A strong adhesive makes my shakers that much sturdier when shaken. Using the E-Z Runner® Ultra Strong Refillable Dispenser, the wreath shaker was added to the card front.

Finally, I added the die cuts and stamped the coffee image using 3D Foam Squares White Mix. I tied a burlap string bow to the mini tag sentiment.

I hope you enjoyed the Holiday Coffee Shaker Card! Don’t forget to keep reading for the Coffee Lover’s giveaway details.
Tracy

Skill Level: Intermediate
Creative Time: 45 minutes

Materials Needed:
Scrapbook Adhesives by 3L®
3D Foam Squares White Mix
3D Foam Circle Frames White
E-Z Runner® Ultra Strong Refillable Dispenser
E-Z Runner® Petite Permanent Dots Refillable Dispenser

Other:
Cardstock- White; Crate Paper- Busy Sidewalks Collection; Spiegelmom Scraps Sequins Mix; Crackerbox Stamps- Rubber Stamps; Zig Clean Color Markers; Waterbrush; Natural Burlap String; Acetate; Circle Dies; Archival Ink- Jet Black

Save to Pinterest!

Holiday Coffee Shaker Card by Tracy McLennon for Scrapbook Adhesives by 3L Pinterest

Coffee Lovers Fall/Winter 2022 Blog Hop

We are so excited to be sponsoring two adhesive prize packages to assist you in your crafting creations! Thanks to Amy Tsuruta and her dedicated crew for coordinating this huge undertaking year after year.

Click the button below to participate, and/or see more inspiration

Coffee Lovers Blog Hop Fall/Winter 2022

If you can’t find the comment section at the bottom of this post, click on this button and scroll down to the bottom of the post and leave a comment.

Holiday Coffee Shaker Card with Coffee Lovers

Visit our Website and Blog!
Sign up for our Newsletter so you never miss a contest or giveaway!

Glitter Shaker Card Tutorial

Posted on November 10, 2022 by Guest Blogger

Hello friends! It’s Shannon up on the blog today bringing you this fun little glitter shaker card filled on top and bottom with Nuvo Rainbow Quartz Triangles! This card was super easy to put together.

Glitter Shaker Card Tutorial by Shannon Allor for Scrapbook Adhesives by 3L

Glitter Shaker Card Base

First, I started with a piece of Jen Hadfield “Stardust” patterned paper in “B.F.F.” I cut the paper 5” x 10” and created a fold down the middle. I rounded the edges on the right side of the card to keep from creasing the corners.

Next, it’s time to have fun with the 3D Foam Circle Frames in White. I removed the adhesive backing off of one side and placed some acetate onto the surface. I then cut around the circle to remove the excess.

Next, it was time to sprinkle a liberal amount of the Nuvo Rainbow Quartz Triangles all over the sticky surface. I made sure to press the glitter into the adhesive side. Make sure to tap off the excess. You may just get glitter everywhere (don’t ask me how I know!).

Shaker Feature

Now it is time to sprinkle a little bit of glitter onto your card base right in the middle of where you would like to place your circle.

Next, gently apply the Premium Double-Sided Tape 1/4in. and remove the backing. Carefully set your glittery circle down. You should have a sparkly shaker on the inside and a gorgeous sparkly circle surrounding all of that shine!

Adding the Finishing Touches

I added some super simple stickers to embellish this sweet little card. I used 3D Foam Square White Mix. This is my favorite dimensional foam adhesive mix. You have the option to choose whichever size suits your project the best! How clever!

I hope that I was able to inspire you today to create a quick and easy glitter shaker card with impact!
Shannon Allor

Creative Time: 20 minutes
Skill Level: Beginner

Materials Needed:
Scrapbook Adhesives by 3L®
3D Foam Circle Frames in White
3D Foam Squares White Mix
Premium Double-Sided Tape ¼” by HomeHobby™ by 3L

Other: Patterned Papers and Stickers: Jen Hadfield (B.F.F. Collection); Shaped Glitter: Nuvo Rainbow Quartz Triangles

Save It to Pinterest!

Glitter Shaker Card Tutorial by Shannon Allor for Scrapbook Adhesives by 3L Pinterest

Visit our Website and Blog!
Sign up for our Newsletter so you never miss a contest or giveaway!

MultiLayer Wreath Christmas Card

Posted on November 9, 2022 by Martha Lucia Gomez

Hello crafty friends, Martha Lucia here to share with you how easy is to make a multilayer wreath Christmas card without Dimension. My today’s project is full of layers but can be easily placed into an envelope to be shipped through our mail service. To make this, I will feature the E-Z Runner Grand Permanent Strips and the Glue Pen Dual Tip.

MultiLayer Wreath Christmas Card by Martha Lucia Gomez for Scrapbook Adhesives by 3L

Multilayer Wreath Process

I started selecting one wreath die cut. Then I die cut it four different times using two different colors of green cardstock.

First, I pasted all the die cut pieces alternating the shapes with E-Z Runner Grand Permanent Strips.

My tip on this type of design alternating the shapes is to avoid bunky parts. I just placed the E-Z Runner Grand Permanent Strips on the center part of the die cuts.

Finishing the Multilayer Christmas Card

I created the card base using a different tone of green cardstock from the ones that I used to make the wreath. Then, I decorated it with a piece of designer paper in contrasting colors. Additionally, I adhered the layered wreath on the center of the card. To add these two pieces, the designer paper, and the wreath, I used E-Z Runner Grand Permanent Strips.

Additionally, I die cut a message or sentiment onto red glitter cardstock. On this opportunity, I used the Glue Pen Dual Tip. I just placed the adhesive behind the letters that were on the center of the wreath to make the sides more flexible.

Thanks for stopping by and let me share how easily is created with multilayers and without dimension. Don’t be afraid to experiment with the unlimited possibilities of your adhesives!
Martha Lucia

Creative Time: 45 minutes
Skill Level: Beginner

Materials Needed:
Scrapbook Adhesives by 3L®
E-Z Runner Grand Permanent Strips.
HomeHobby™ by 3L
Dual Tip Glue Pen

Save to Pinterest!

MultiLayer Wreath Christmas Card by Martha Lucia Gomez for Scrapbook Adhesives by 3L Pinterest

Visit our Website and Blog!
Sign up for our Newsletter so you never miss a contest or giveaway!

Happy Birthday Stars Card

Posted on November 7, 2022 by Teri Anderson

Hi, everyone! Like to add texture to your handmade cards? Teri here to show you how with my Happy Birthday Stars Card with 3D Foam Shapes and flock!

Happy Birthday Stars Card by Teri Anderson for Scrapbook Adhesives by 3L

This fun Wear Your Adhesive on the Outside technique is so fun and adds a ton of pizazz and pop to cards.

Making the Birthday Stars

Start by adhering several strips of patterned paper to a piece of cardstock. Place several foam shapes on top. I used 3D stars, but any open foam shape will work.

Burnish flock onto the shapes. Rub a piece of wax paper along the shapes to help burnish it down. Cut the shapes out with your scissors and set them aside.

Texture the Frame

Create a frame by adhering a 3D Foam Frame to patterned paper and cutting it out. Cover it with the flock. I recommend using a paint brush to sweep away any stray flock after you’ve burnished the flock to the frame.

Assembling the Card

Adhere a panel of patterned paper onto a top-folded card. Add your frame and the stars. Use Crafty Foam Tape to affix the largest element to the card.

Embellish your frame with a couple of Creative Photo Corners and sequins. Stamp a sentiment on a strip of cardstock and adhere it to the card. Be sure to put foam strips on it, separating where it will overlap your foam shapes.

Complete the card by rolling some adhesive along the top and bottom of the card. Burnish some foil on top. Depending on what look you are going for, use either Dots or Strips for the adhesive.

Thank you so much for stopping by today! I hope you are inspired to add some texture to your next card or scrapbook page just like my Happy Birthday Stars Card!

Teri Anderson

Creative Time: 60 Minutes
Skill Level: Intermediate

Materials Needed
Scrapbook Adhesives by 3L®

Other
White Cardstock: Neenah Paper; Patterned Paper: Simple Stories (Sunkissed Collection); Stamp: Lawn Fawn (Simply Sentiments Stamp Set); Flock: Stampendous!; Ink: Ranger Ink; Sequins: Cartwright’s Sequins

Save to Pinterest!

Happy Birthday Stars Card by Teri Anderson for Scrapbook Adhesives by 3L Pinterest

Visit our Website and Blog!
Sign up for our Newsletter so you never miss a contest or giveaway!

Thanksgiving Pumpkin Card

Posted on November 5, 2022 by Yvonne van de Grijp

Hi everyone, Yvonne here with a Thanksgiving Pumpkin Card. Being fall, the leaves are falling and pumpkins are ready to harvest. With that in mind, I created this easy-to-create card.

Thanksgiving Pumpkin Card by Yvonne van de Grijp for Scrapbook Adhesives by 3L

This pumpkin card is all about simple layering, some coloring, and adhering. Wanna join me in creating this thanksgiving card?

Making the Top Card Panel

Start by stamping the pumpkins and twines onto a white cardstock panel using a black ink pad. Also, stamp an extra image of the pumpkins onto a smaller piece of paper.

Next color the image of the separately stamped pumpkin. Then color the outlines of the pumpkin image you stamped onto the white card panel.

Layering the Pumpkin Card

Cut out the colored image of the pumpkins and fussy cut the image. Then adhere onto the top card panel using Thin 3D Foam Squares White Mix.

This way you create a subtle uplifting effect on your card. Then adhere the panel onto a dark brown card panel and use the E-Z Runner® Grand Refillable Dispenser to adhere.

Next, adhere onto a white card base again using the E-Z Runner® Grand Refillable Dispenser for affixing.

Embellishing the Pumpkin Card

Place a Happy Thanksgiving sticker onto a banner cut out from a leftover piece of dark brown cardstock (the same color you used for the middle card panel) and secure to the card using Thin 3D Foam Squares White Mix.

Adhere some tiny green mulberry leaves all over the card using the Dual Tip Glue Pen for adhering.

And voilá your Thanksgiving Pumpkin Card is ready. Easy to make, wasn’t it?

Wishing you happy crafting,

Yvonne van de Grijp

Creative Time: 40 minutes

Skill Level: Beginner

Materials needed:

Scrapbook Adhesives by 3L®

E-Z Runner® Grand Refillable Dispenser

Thin 3D Foam Squares White Mix

HomeHobby™ by 3L

Dual Tip Glue Pen

Other

Cardstock (White, Dark Brown, Orange); Stamps (Katzelkraft: Champ de citrouilles); Inkpad (Versafine: Onyx Black); Color Pencils (Faber Castell: Polychromos pencils); Scissors; Paper Trimmer; Tweezers

Save to Pinterest!

Thanksgiving Pumpkin Card by Yvonne van de Grijp for Scrapbook Adhesives by 3L Pinterest

Visit our Website and Blog!
Sign up for our Newsletter so you never miss a contest or giveaway!

Pumpkin Square Card Set

Posted on November 3, 2022 by Connie Mercer

Hi, Connie here with an easy and fun way to make a plaid background using the E-Z Runner Grand Repositionable Dots Refillable Dispenser and Distress Oxide Ink. I’m using pumpkin stamps to bring on the fall weather in this Pumpkin Square Card Set! Hoping anyway!

Pumpkin Square Card Set by Connie Mercer for Scrapbook Adhesives by 3L

These Pumpkin Squares Cards are about 4″, so you will need to cut your card base, card mats, and card front accordingly. For my card front, I’m using a piece of white cardstock with some ink stains (in my stash). Now I’m all ready to go!

Plaid Background for the Pumpkin Square Card

1. Gather the supplies. You will need E-Z Runner Grand Repositionable Dots Refillable Dispenser, Distress Oxide Ink in Spiced Marmalade, and seasonal-themed stamps.
2. Starting from top to bottom, apply the Repositionable Dots Adhesive. Turn the cardstock and go horizontally with the adhesive. Apply the Distress Oxide Ink to the card front using a foam applicator.
3. Using your finger rub off the repositionable adhesive. The plaid design will start to show.
4. When all the adhesive is removed, spray the card front with water and then dab off. This will give you a distressed look.

Stamping and Embossing the Pumpkin Square Card

1. Using a stamping platform, stamp the image onto the card front. Re-stamp if necessary.
2. To put the card together, you will need the E-Z Runner Permanent Strips Refillable Dispenser, the Crafty Foam Tape 108′, and 3D Foam Strips (for the words).
3. Emboss the stamped words, using white embossing powder, on black cardstock. Cut into a word strip.
4. Adhere the Crafty Foam Tape 108′ to the card front and then adhere to the black cardstock mat.

Last Finishing Steps

1. Adhere the black cardstock mat to the yellow mat using the E-Z Runner Permanent Strips Refillable Dispenser.
2. Then the yellow cardstock mat to the folded white cardstock base.
3. I ran out of adhesive in between this process so super easy just popped in a NEW E-Z Runner Strips Refill.
4. Add the 3D Foam Strips to the back of the embossed word strips and adhere to the card fronts. Speckle with white acrylic paint to finish the cards.

Thanks for stopping by !!
Connie Mercer

Creative Time: 50 minutes
Skill Level: Beginner

Materials Needed:
Scrapbook Adhesives by 3L®
E-Z Runner Permanent Strips Refillable Dispenser
E-Z Runner Grand Repositionable Dots Refillable Dispenser
3D Foam Strips
Crafty Foam Tape 108′

Other: Stamps: KatzelKraft (KTZ 278); Ink: Ranger Ink (Archival in Jet Black, and Distress Oxide Ink in Spiced Marmalade); Embossing Powder: Wow Embossing Power; Stamping Platform: Misti (My Sweet Petunia)

Save to Pinterest!

Pumpkin Square Card Set by Connie Mercer for Scrapbook Adhesives by 3L Pinterest

Visit our Website and Blog!
Sign up for our Newsletter so you never miss a contest or giveaway!

Dotted Happy Thanksgiving Card

Posted on November 1, 2022 by Jamie Martin

Hi, Jamie here with you today and I have a Dotted Happy Thanksgiving card that is perfect to send out to friends and family that can’t be with us for the holiday

Dotted Happy Thanksgiving Card by Jamie Martin for Scrapbook Adhesives by 3L

Create a Dotted Happy Thanksgiving Background

Stamp the sentiment with VersaMark ink and heat emboss with Lettuce Embossing Powder on a piece of white cardstock panel. Make the background by stamping with a dotted background stamp using Citrus ink. Then watercolor the little pumpkin with watercolor pencils using a touch of water since the paper is not watercolor paper.

Assembling the Layers

Secure the Dotted Happy Thanksgiving panel with a piece of wine color card using the E-Z Runner Grand Refillable Dispenser.

Place a circle die on the right edge of a patterned paper card panel to create an offset window. Next, add 3D Foam Strips on the back of the panel along the edges and around the circle.

Pumpkins and leaves were die-cut from white cardstock and colored with orange and green inks.

The Finishing Touches

Using circle dies, a circle frame was die-cut from wine cardstock and glued to the top of the circle opening with the Dual Tip Glue Pen. Add a strip of decorative paper to the bottom portion of the card. Use a combination of Dual Tip Glue Pen and 3D Foam Squares to give them differing heights. The Dotted Happy Thanksgiving Card is ready to be sent!

Skill Level: Intermediate
Creative Time: 35 minutes

Materials Needed:
Scrapbook Adhesives by 3L®
E-Z Runner Grand Refillable Dispenser
3D Foam Strips
3D Foam Squares White Small

HomeHobby™ by 3L
Dual Tip Glue Pen

Plus
Rubbernecker Stamps – Stamps, Dies, Inks, Decorative Paper
PrintWorks Specialty Paper – Cardstock

Save to Pinterest!

Dotted Happy Thanksgiving Card by Jamie Martin for Scrapbook Adhesives by 3L Pinterest

Visit our Website and Blog!
Sign up for our Newsletter so you never miss a contest or giveaway!

Themed Papers for a Masculine Birthday Card

Posted on October 29, 2022 by Judy Hayes

Hello friends! I often like to challenge myself to use products in a little different way. Today’s masculine birthday card features papers from Photo Play’s “For the Love of Winter” Collection! The blue colors seem perfect for a guy’s card, so I chose papers that didn’t necessarily depict winter to make this card. I’m so happy with how it turned out!

Themed Papers for a Masculine Birthday Card by Judy Hayes for Scrapbook Adhesives by 3L

Masculine Birthday Card Base

To make this card, form a 4 x 6.5 inches card base from white cardstock. Cut a piece of wood-patterned paper to 4 x 6.5 inches. Secure it to the card front using E-Z Runner® Petite Permanent Dots Refillable Dispenser.

Embellish the Band Accent

Cut a 1 x 7-inch strip of dark blue paper and roll the adhesive along both long edges with E-Z Runner® Petite Permanent Dots Refillable Dispenser. See the image on placement.

Sprinkle Distress Glaze Uncharted Mariner over the adhesive, tap off the excess and melt with a heating tool. Trim long edges as needed so the glaze pattern is on the very edge.

Cut a strip of stripe paper to about 0.5 x 7 inches and adhere to the glazed band using E-Z Runner® Petite Permanent Dots Refillable Dispenser.

Secure a piece of 0.75 x 7 inches strip of aqua music paper behind the layered and glazed band along the top edge with the E-Z Runner® Petite Permanent Dots Refillable Dispenser.

Cut “birthday”

Trim a piece of dark blue paper and black cardstock large enough to cover a “birthday” die. Next, apply a sheet of Adhesive Sheets 4×6 inch to the back of the dark blue paper. Simply pull back the yellow liner, place the dark blue paper facing up on top of the adhesive, cover the liner back on top of the paper and rub the adhesive to transfer it to the paper. Remove the paper and adhere it to the black cardstock.

View How to Use Adhesive Sheets Video

Place the “birthday” die on the dark blue paper side and run it through the die-cutting machine 2-3 times. Gently remove the die-cut word and set it aside.

Stamp Part of the Sentiment

Stamp “Happy” with Medieval Blue ink on a piece of wood grain paper. Trim close around the word.

Assemble Masculine Birthday Card

Use E-Z Runner® Petite Permanent Dots Refillable Dispenser to apply adhesive to the back of the band and adhere across the card front. Trim ends even with card edge.

Grab the dot and plaid banners from the collection’s ephemera pack. Use one of the banners as a template to cut a third banner from music paper. Arrange the banners and secure them to the card using E-Z Runner® Petite Permanent Dots Refillable Dispenser. Tuck the top of the banners under the band or trim to fit.

Use E-Z Runner® Petite Permanent Dots Refillable Dispenser to fasten the “Happy” strip on the card.

Squeeze a small amount of glue from Dual Tip Glue Pen onto a scrap of cardstock. Use a small brush to apply glue to the back of the “birthday” die cut. It’s not necessary to completely cover all of it with glue. Place on the card and press firmly in place.

Tie a bow thread to each button and then place an Adhesive Dots Small on the back of each. Peel off the liners and press in place on the band.

So what do you think of my Masculine Birthday Card? I challenge you to take a themed pack of papers and turned them into any occasion card creation.

Thanks for Visiting!
Judy Hayes

Creative Time: 40 mins
Skill Level: Intermediate

Materials Needed:
Scrapbook Adhesives by 3L®

Adhesive Dots Small

E-Z Runner® Petite Permanent Dots Refillable Dispenser

Adhesive Sheets 4×6 inch

HomeHobby™ by 3L

Dual Tip Glue Pen

Other

Buttons Galore and More (buttons), Hero Arts Stamps (Sending Love Mail), Imagine Crafts/Tsukineko Versafine Clair (Medieval Blue), PhotoPlay Paper Co. (For the Love of Winter Collection), Ranger Ink (Distress Glaze-Uncharted Mariner), Spellbinders Paper Arts (Yanna’s Layered Script Sentiment), Thread or Crochet Thread (Cream), Cardstock (White, Scrap of Black)

Save to Pinterest!

Themed Papers for a Masculine Birthday Card by Judy Hayes for Scrapbook Adhesives by 3L Pinterest

Visit our Website and Blog!
Sign up for our Newsletter so you never miss a contest or giveaway!

Foiled Dots Grateful Card Tutorial

Posted on October 26, 2022 by Martha Lucia Gomez

Hello crafty friends, Martha Lucia here with a fun and easy tutorial to create a Foiled Dots Grateful Card using Adhesive Dots Medium and Metallic Transfer Foil Sheets Nature Colors.

Foiled Dots Grateful Card Tutorial by Martha Lucia Gomez for Scrapbook Adhesives by 3L

The Wear Your Adhesive on the Outside technique used on this Grateful card is one of the simplest and most fun ways to use your adhesive beyond layers of paper.

Creating the Dots

Randomly place the Adhesive Dots Medium on a white smooth cardstock panel. Keep the liner on the dots to protect them until you get your desired look.

Have you ever used our Adhesive Dots and Adhesive Lines products? They have a patented dispenser for easy application. View the How to Use Adhesive Dots video below to see how it works.

Next, remove the cover film over the Adhesive Dots that you wanted from the panel to cover them with a single color of Metallic Transfer Foil Sheets Nature Colors .

I started with the Cooper Orange and then moved to the Brown and Gold.

Creating the card

Once I was satisfied with the tones and position of the Adhesive Dots, I matted the foiled dotted piece with a cajun craze cardstock. I pasted both layer using theE-Z Runner Grand Permanent Strips.

To add a message or sentiment to my card, I decided to use a die cut sentiment in coordinating colors. First, I die cut the Grateful for You Die, twice onto white smooth and cajun craze cardstock.

I created a card base using white smooth card stock. Additionally, I pasted both pieces in between created a little shadow using the Glue Pen Dual Tip. I also pasted the decorative layer over the card base using the same E-Z Runner Grand Permanent Strips.

To paste the sentiment over the card base I used the Glue Pen Dual Tip.

Thanks for stopping by and don’t be afraid to experiment with the unlimited possibilities with your adhesives!
Martha Lucia

Creative Time: 45 minutes
Skill Level: Beginner

Materials Needed:
Scrapbook Adhesives by 3L®
E-Z Runner Permanent Fine Adhesive
Adhesive Dots Medium
Metallic Transfer Foil Sheets Nature Colors

HomeHobby™ by 3L
Dual Tip Glue Pen

Save to Pinterest!

Foiled Dots Grateful Card Tutorial by Martha Lucia Gomez for Scrapbook Adhesives by 3L Pinterest

Visit our Website and Blog!
Sign up for our Newsletter so you never miss a contest or giveaway!

Pumpkins in Fall Layout

Posted on October 24, 2022 by Guest Blogger

Hello friends! It’s Shannon up on the blog today bringing you this cute Pumpkins fall-themed layout featuring all kinds of fall goodness! I wanted to continue playing with the Metallic Transfer Foil sheets. I had so much fun creating my title using the Foil Sheets and 3D Foam Sheets!

Pumpkins in Fall Layout by Shannon Allor for Scrapbook Adhesives by 3L

Pumpkins Title

Start with using some dies from my stash to create a title. I ran the foam sheets through my manual die cutting machine and then peeled the top layer from the letters.

Wear Your Adhesives on the Outside with Foil

Next, I applied a brown Foil Sheet to the adhesive. LOVE how it came out! Use the same foiling technique that I did with the title to the leaves. It ties in the embellishments to my title – love it!

With a bunch of scraps, I created the base of my layout. But first, ink the edges to give a bit of separation between all of the patterns. Now it was time to mat my photo using my E-Z Runner Grand. I love that it provides such a great hold yet I can pick up and move my pieces around if I do it quickly enough!

Finishing Touches

Pop up a few embellishments with the 3D Foam Squares. This creates both dimension and a bit of a shadow.

I love how quickly this Pumpkins fall layout came together! I used some great adhesives and bits and pieces from my stash!

View Process Video

You can see my complete process here: https://youtu.be/TMvt39aQ9Vw

Happy crafting!
Shannon Allor

Creative Time: 45 mins.
Skill Level: Intermediate

Materials Needed:
Scrapbook Adhesives by 3L®

3D Foam Sheets

Metallic Transfer Foil Sheets Nature Colors

3D Foam Leaves

E-Z Runner® Grand Dispenser

Other: Patterned Paper and Stickers: Echo Park; Ink: Ranger Ink (Distress Oxide Inks); Flair: Scrappin’ Happy Studio; Cardstock: Bazzill Basic Papers

Save to Pinterest!

Pumpkins in Fall Layout by Shannon Allor for Scrapbook Adhesives by 3L Pinterest

Visit our Website and Blog!
Sign up for our Newsletter so you never miss a contest or giveaway!