You are in our US store • Switch to Europe store

Margie Higuchi

Rule the World Shaker Card with Coffee Lovers

Congratulations to our winners, LeeAnn, Kathy and June!! Check your emails!

Welcome! It’s time for the Spring/Summer Coffee Lovers Blog Hop with this adorable coffee-themed project! As a SUPER SPONSOR, we’ve provided great prizes too! Grab a cuppa and join the hop with your own beverage-themed artwork!

What is Coffee Lovers? It is a coffee-loving (or tea or cocoa) community of card makers open to everyone. Their blog offers inspirational coffee-related posts and bi-annual coffee blog hops that YOU can join. You get a chance to win the giveaways as a blogger! So read until the very end!

Margie shows you how she creates an easy and fun shaker card with Scrapbook Adhesives by 3L® products. Follow along and learn a few ideas. Let’s Rule the World with this shaker card!

Rule the World Shaker Card by Margie Higuchi for Scrapbook Adhesives by 3L

Rule the World Shaker Card by Margie Higuchi

Hi, coffee-loving friends! Margie here today sharing a coffee-themed shaker card with texture and an unexpected element too. Using the Keepsake Envelopes, I share how to make an easy and fast way to create a shaker feature. Let me show you how, along with other ideas!

Shaker Card Basics and Texture

I cut three layers for this green A2-sized (4.25 x 5.5-inch) card base. The yellow patterned paper was cut at 4 x 5.25-inches, the Kraft paper was cut at 3.75 x 5.00-inches and the flower patterned paper was cut at 2 x 4-inches to slid inside the Keepsake Envelope (on the right side of image).

Rule the World Shaker Card by Margie Higuchi for Scrapbook Adhesives by 3L

To make texture on the Kraft cardstock panel, I used a coffee-themed embossing folder and rolled it through the die-cutting machine. LOVE how it turned out!! Designer’s Note: lightly water mist the Kraft panel before embossing for a crisp embossed design.

Rule the World Shaker Card by Margie Higuchi for Scrapbook Adhesives by 3L

Making a Window

Die-cut a coffee cup window shape in the embossed Kraft panel. Set aside.

Rule the World Shaker Card by Margie Higuchi for Scrapbook Adhesives by 3L

Since I had my die-cutting machine out, I die-cut the lid and the sleeve out of ivory cardstock. Then I stamped the sentiment on the sleeve with brown ink. Set aside.

Rule the World Shaker Card by Margie Higuchi for Scrapbook Adhesives by 3L
Rule the World Shaker Card by Margie Higuchi for Scrapbook Adhesives by 3L

Shaking It Up a Bit

Slip the 2 x 4-inch flower patterned paper into the rectangle Keepsake Envelope. Add sequins and shaped glitter in front of the paper. Take the small liner in front off, fold the flap over on top to seal. Keep the back liner on – you will need it to add to the Kraft window panel.

Rule the World Shaker Card by Margie Higuchi for Scrapbook Adhesives by 3L

Apply E-Z Runner® Grand Ultra Strong adhesive on the edges of the Kraft window panel. Using the back liner of the Keepsake Envelope as a handle, place the envelope over the window and use the liner to press the envelope into the adhesive to secure.

Rule the World Shaker Card by Margie Higuchi for Scrapbook Adhesives by 3L
Rule the World Shaker Card by Margie Higuchi for Scrapbook Adhesives by 3L

Adding a Twist

To add some fun, I had an unused coffee cup stopper that I grabbed from my coffee shop. I used a combination of Adhesive Dots 3D for the top (because it had a stopper and was thick) and Adhesive Dots Small for the bottom tip. I tuck the bottom into the window and then secured the top.

Rule the World Shaker Card by Margie Higuchi for Scrapbook Adhesives by 3L

Then I added 3D Foam Strip on the top edge of my window to lift the coffee lid over the coffee stopper. I stacked two strips. Repeat for the sleeve.

Rule the World Shaker Card by Margie Higuchi for Scrapbook Adhesives by 3L
Rule the World Shaker Card by Margie Higuchi for Scrapbook Adhesives by 3L

Assembly the Card

Take off the bottom liner of the Keepsake Envelope and apply E-Z Runner® Grand Ultra Strong adhesive on the Kraft window panel. Adhere to the yellow patterned card panel.

Rule the World Shaker Card by Margie Higuchi for Scrapbook Adhesives by 3L

Lift the layered panel with Crafty Foam Tape White and secure onto the green card base. You’re done!

Rule the World Shaker Card by Margie Higuchi for Scrapbook Adhesives by 3L

I hope that my Rule the World Shaker Card inspired you to try this easy method for a shaker element.

Rule the World Shaker Card by Margie Higuchi for Scrapbook Adhesives by 3L

Keep reading for the Coffee Lover’s giveaway details!

Thanks for stopping in!
Margie Higuchi

Materials Needed:
Scrapbook Adhesives by 3L®
Keepsake Envelopes Mix
E-Z Runner® Grand Refillable Dispenser
E-Z Runner® Grand Ultra Strong Refill
3D Foam Strips
Adhesive Dots Small
Adhesive Dots 3D
Crafty Foam Tape White

Other
Patterned Papers: Authentique Paper (Blissful Collection); Stamps and Dies: My Favorite Things Stamps (Perk Up Stamps and Coffee Cup Dies); Ink: Ranger Ink (Fray Burlap Distress Ink); Embossing Folder: Sizzix (On the Go Texture Fades by Tim Holtz); Green Card Base; Kraft and Ivory Cardstock; Coffee Cup Stopper; Shaped Glitter: WOW! Embossing Powder; Sequins

Save It to Pinterest!

Rule the World Shaker Card by Margie Higuchi for Scrapbook Adhesives by 3L Pinterest

Click the button below to participate, and/or see more inspiration

If you can’t find the comment section at the bottom of this post, click on this button and scroll down to the bottom of the post and leave a comment.

Let’s Connect!

instagram purple facebook purple pinterest purple twitter purple SAby3L YouTube icon blog purple



51 Responses to "Rule the World Shaker Card with Coffee Lovers"

  • Connie Mercer
  • Amy Tsuruta

We appreciate your comments