Scrapbook Adhesives by 3L Crafty Power Blog

Picket Fence Hello Gorgeous Card

Posted on April 17, 2023 by Yvonne van de Grijp

Hi everyone, Yvonne here with a quick and easy-to-make card. I added a fun element to this Picket Fence Hello Gorgeous Card. Do you see what it is? It will certainly bring brighten someone’s day! Let me show you how to create this Picket Fence Card Let’s get started!

Picket Fence Hello Gorgeous Card by Yvonne van de Grijp for Scrapbook Adhesives by 3L

Create a Layered Card Base

Before starting on the picket fence element, let’s get the foundation together. Layer a piece of patterned paper and a black card panel together before adhering them to a white card base. with the E-Z Runner® Grand Ultra Strong Refillable Dispenser.

Making the Picket Fence

Start by adhering the wooden craft sticks (aka popsicle sticks) onto a piece of scrap white cardstock.

Make sure the sticks cover the cardstock, so no cardstock will stick out. For an extra strong hold, use the E-Z Runner® Grand Ultra Strong Refillable Dispenser to adhere them to the cardstock.

Embellishing the Card Front

Start by adhering Crafty Foam Tape 108ft to the back of the Picket Fence element to the layered card base. Remove the liner and adhere the wooden fence to the card base.

Trim a sentiment from patterned paper and adhere to the fence using Crafty Foam Tape 108ft. for dimension and interest. Adhere a piece of lace trim across the fence using Crafty Power Tape Dispenser 81ft. Tie a black ribbon bow and adhere with Adhesive Dots Medium Ultra Thin.

And voilá your Picket Fence Hello Gorgeous Card is ready! I hope you enjoyed this simple tutorial and wish you happy crafting!

Yvonne van de Grijp

Creative Time: 20 minutes

Skill Level: Beginner

Materials needed:

Scrapbook Adhesives by 3L®

E-Z Runner® Grand Ultra Strong Refillable Dispenser

Crafty Foam Tape 108ft

Adhesive Dots Medium Ultra Thin

Crafty Power Tape Dispenser 81ft

Other: Cardstock (White, Black); Patterned Paper (Photoplay™: Our Friendship Collection Pack); Wooden Popsicles; Lace; Satin Bow; Scissors; Paper Trimmer

Save to Pinterest!

Picket Fence Hello Gorgeous Card by Yvonne van de Grijp for Scrapbook Adhesives by 3L Pinterest

Visit our Website and Blog!
Sign up for our Newsletter so you never miss a contest or giveaway!

Floral Foil Shaker Card

Posted on April 15, 2023 by Jamie Martin

Hi, Jamie here today! I have a Floral Foil Shaker Card featuring a combination of the Metallic Transfer Foil Sheets Pastel Colors and Metallic Transfer Foil Sheets Nature Colors that Scrapbook Adhesives by 3L® has to offer. You’ll really want to try this Wear Your Adhesive on the Outside technique.

Floral Foil Shaker Card by Jamie Martin for Scrapbook Adhesives by 3L

Wear Your Adhesive on the Outside with the Background Panel

Make the background with a combination of Premium Double-Sided Tape 1in, Premium Double-Sided Tape 1/2in, Premium Double-Sided Tape 1/4in, and Premium Double-Sided Tape 1/8in is placed diagonally across a 4 1/4″ x 5 1/2″ white cardstock panel.

For a marbled look, crumble up a piece of pink foil from the Metallic Transfer Foil Sheets Pastel Colors and flatten it to place on one of the tapes (remove the tape liner and place the foil color facing you). Rub to transfer the color to the tape and peel off the foil. Next, place a solid color black foil from the Metallic Transfer Foil Sheets Nature Colors over the partially foiled tape and rub (again, color side facing you). Remove the foil and this will create a veined look. Repeat the steps until all the tapes are foiled.

Die-cut the panel using a scalloped rectangle-shaped cutting die. Now to add the interactive feature.

Making The Shaker

Shaker cards are made easily with the 3D Foam Circle Frames White. All you do is pick the size of the circle that you need and place it on your panel. Die-cut a circle that fits inside of the foam circle, stamp a sentiment with black ink, and emboss it with clear embossing powder. Add a couple of self-adhesive pearls. Adhere the circle to the inside of the foam circle with the Dual Tip Glue Pen which gives me the chance to center the circle where I want it.

The Shaker Bits

Next, place the shaker bits in the center of the foam circle. Designer’s Note: when removing the liner from the 3D Foam Circle Frames White, hold your card with one hand and remove the liner slowly so the little bits don’t jump up on the adhesive.

The Floral Accents

Flowers were die-cut twice from white cardstock and once from black cardstock. Sponge pink ink on one of the white cardstock pieces and trim the flowers. On the other white piece, sponge the stems in green ink before adhering the pink flowers with the Dual Tip Glue Pen. Layer the black piece behind the inked flowers to create a shadow.

Final Touches

From white cardstock, die-cut a scallop circle shape with the center die-cut with a circle die. Place the acetate behind the scallop shape using the Dual Tip Glue Pen. Add the flowers to the left side of the shaker with the Dual Tip Glue Pen. Finally, mount the shaker panel to a green card using the E-Z Runner® Grand Permanent Strips Refillable Dispenser.

Thanks for Visiting!
Jamie Martin

Creative Time: 50 mins
Skill Level: Advanced

Materials Needed:
Scrapbook Adhesives by 3L®
E-Z Runner® Grand Permanent Strips Refillable Dispenser
3D Foam Circle Frames White
Metallic Transfer Foil Sheets Pastel Colors
Metallic Transfer Foil Sheets Nature Colors

HomeHobby™ by 3L
Premium Double-Sided Tape 1in, Premium Double-Sided Tape 1/2in, Premium Double-Sided Tape 1/4in, and Premium Double-Sided Tape 1/8in
Dual Tip Glue Pen

Other:
Rubbernecker Stamps- Nested Circle Dies, Nested Scallop Rectangles, Color Fuse Inks, Crossover ll Die-cut Machine
Sizzix/ Tim Holtz- Flower Dies
Divinity Designs- Mini Tag Die
Printworks Specialty Paper- Cardstock

Save to Pinterest!

Floral Foil Shaker Card by Jamie Martin for Scrapbook Adhesives by 3L Pinterest

Visit our Website and Blog!
Sign up for our Newsletter so you never miss a contest or giveaway!

Foiled 3D Squares Hello Card

Posted on April 13, 2023 by Judy Hayes

Hi, Judy here today! Here’s a fun Foiled 3D Squares Hello Card that’s super easy to make. It features 3D Foam Squares and Metallic Transfer Foil Pastels. Change out the foil colors to Nature or Holographic for a totally different look! Simply change the verse to use it for different occasions.

Foiled 3D Squares Hello Card by Judy Hayes for Scrapbook Adhesives by 3L

3D Foam Square Foiled Panel

Cut a piece of white cardstock to 2.875 x 4.125 inches. Then cut a black cardstock mat into 3 x 4.25 inches. Set aside the black mat.

Use a ruler as a guide along one long edge to place the squares. To make it easier to keep the ruler in place apply a small amount of removable adhesive to the ruler with E-Z Dots® Repositionable Dispenser.

Put the ruler about .75 inches from one long edge and add four 3D Foam Squares White Regular along the ruler from top to bottom. Continue to randomly add 3D Foam Squares White Regular within about .5 inches of each side, top and bottom. Remove the ruler and rub off the adhesive dots from the ruler and any excess on the white panel. Place one 3D Foam Squares White Regular to the left of the first four squares.

Place Thin 3D Foam Squares White Mix between and around larger squares keeping them about .25 inches from the side edges.

Apply Foil

Peel the liner from one 3D Foam Squares White Regular, place the foil sheet over it (color side facing you), rub to transfer the foil, and peel away. Repeat on 2 to 3 large foam squares with the same color. Choose another sheet of foil and repeat. Continue until all large squares are foiled.

Now, peel the liner from the smaller Thin 3D Foam Squares White Mix, place foil over it, rub with the color side facing you, and peel away the foil. Repeat with all colors until all squares are foiled.

Assemble Card

Fasten the white foiled squares panel to a black mat using E-Z Dots® Permanent Refillable Dispenser to apply adhesive. Form a 4.25 x 6-inch side fold card from aqua cardstock. Use E-Z Dots® Permanent Refillable Dispenser adhesive to fasten the foiled panel to the card front.

With a stamp positioner, stamp the greeting with black ink. That’s it! A pretty Foiled 3D Squares Hello Card!

Thanks for Visiting!
Judy Hayes

Creative Time: 20 mins
Skill Level: Beginner

Materials Needed:
Scrapbook Adhesives by 3L®

E-Z Dots® Permanent Refillable Dispenser, E-Z Dots® Repositionable Dispenser

3D Foam Squares White Regular

Thin 3D Foam Squares White Mix

Metallic Transfer Foil Sheets Pastel Colors (lavender, blue, green, yellow, pink)

Other: Stamp: Penny Black Inc (Friendship); Ink: Imagine Crafts/Tsukineko (Versafine Onyx Black); Aqua, White, Black Cardstock

Save to Pinterest!

Foiled 3D Squares Hello Card by Judy Hayes for Scrapbook Adhesives by 3L Pinterest

Visit our Website and Blog!
Sign up for our Newsletter so you never miss a contest or giveaway!

Lots of Layers Scrapbook Layout

Posted on April 11, 2023 by Tracy McLennon

Hello crafty friends! Tracy here, and today I have a layout to share packed with lots of layers. Here are all of the dimensional details.

Lots of Layers Scrapbook Layout by Tracy McLennon for Scrapbook Adhesives by 3L

Let’s Get Started

The very first steps on creating this lots of layers layout is to trace the circular outline for the wreath onto the background patterned paper. This is when I also splattered the misters around that circle. Set aside to let dry.

Die cut the photo frame from white cardstock. Adhere the 4×6 photo to the die cut from using Creative Photo Corners White. I like lots of dimension around my focal photo. So I adhered the matted photo to the background using 2 layers of Crafty Foam Tape White. This leaves lots of room around the photo for different levels of dimension.

Begin adhering the fussy cut flower clusters in the bottom left hand corner, and top right hand corner of the wreath using a combination of 3D Foam Squares White Mix and Thin 3D Foam Squares White Mix. The punched out hexagons get adhered around the wreath using Thin 3D Foam Squares White Mix with gold pearls in between them. This completes the lots of layers wreath.

Attach the chipboard title to the layout using the Dual Top Glue Pen, just to the right of the matted photo. I added the ribbon flowers and cheesecloth using Adhesive Dots Large.

Thanks so much for stopping by!
Tracy

Creative Time: 60 mins
Skill Level: Intermediate

Materials Needed:
Scrapbook Adhesives by 3L®
Adhesive Dots Large
Dual Top Glue Pen by HomeHobby™ by 3L
Crafty Foam Tape White 13ft.
Creative Photo Corners White
Thin 3D Foam Squares White Mix
3D Foam Squares White Mix

Other: Heartfelt Creations (patterned paper, frame die); Hexagon Punch; Gold Pearls; Media Gloss Spray (White, Lime); Cardstock- White; Cheesecloth; Ribbon Rosettes; Creative Embellishments Chipboard

Save to Pinterest!

Lots of Layers Scrapbook Layout by Tracy McLennon for Scrapbook Adhesives by 3L Pinterest

Visit our Website and Blog!
Sign up for our Newsletter so you never miss a contest or giveaway!

Angle Tri-Fold Card

Posted on April 9, 2023 by Martha Lucia Gomez

Hello there, Martha Lucia here today! Today, I want to share an Angle Tri-Fold Card. A different folding way that I am sure will impress your friends!

Angle Tri-Fold Card by Martha Lucia Gomez for Scrapbook Adhesives by 3L

Card Template

To make this fabulous angle fold you will need a piece of cardstock of 11″ x 5-1/2″. First, make the score at 3-3/8″ on each side. Then, mark a point on 1-3/4″ from the top. Now, make a mark on the 1″ on the bottom part.

I found several hand-drawn diagrams online. So I created a digital diagram to show where to cut and score. Hope it will be helpful to you as a reference. The dotted lines are for scoring/folding, and the continuous lines are for cutting.

Angle Tri-Fold Card by Martha Lucia Gomez for Scrapbook Adhesives by 3L Card Template

To decorate the front panels of the Angle Tri-Fold card, just cut a piece of 3-1/8″ x 5-1/4″ of patterned paper and mark the same points from the folding pieces. These are 1-3/4″ from the top and 1″ on the bottom. In my card, I used double-sided paper and alternated the designs to create a contrast. I adhered the two layers directly over the card base using E-Z Runner Grand Refillable Dispenser.

Belly Band and Decoration

To make the belly band, you will need a piece of card stock of 1″x11″. Remember to decorate your card inside if you want to include a different color of cardstock or designer paper. Then, wrap the belly band around the card and paste the ends with a strong adhesive. I used the same E-Z Runner Grand Refillable Dispenser one of my favorites for paper goods!

Then you can add a stamped image or a sticker or ephemera over the belly band. I used one ephemera piece that I added with one circle from the 3D Foam Circles Black Mix.

As a final touch, I added a sticker sentiment and some small circles from 3D Foam Circles Black Mix, over the belly band. Then, I applied two colors of foil onto them to coordinate with the patterned paper. I used a small piece of red foil from the Metallic Transfer Foil from the Variety Colors.

Thanks for Visiting!
Martha Lucia Gomez

Creative Time: 60 mins
Skill Level: Beginner

Materials Needed:
Scrapbook Adhesives by 3L®

E-Z Runner® Grand Permanent Strips Refillable Dispenser
3D Foam Circles Black Mix
Metallic Transfer Foil from the Variety Colors

Other: Papers, Stickers + Ephemera: Simple Stories (Say Cheese Main Street); Basic Black and Daffodil Cardstock

Save to Pinterest!

Visit our Website and Blog!
Sign up for our Newsletter so you never miss a contest or giveaway!

A Friend Like You Card

Posted on April 7, 2023 by Teri Anderson

Hi, everyone! Teri here to show you how to create a special card to give them a warm and fuzzy feeling. Send this A Friend Like You Card with a little flock and 3D Foam Shapes!

A Friend Like You Card by Teri Anderson for Scrapbook Adhesives by 3L

Frame the Friend Card Front

Start by adhering a few strips of patterned paper onto a piece of cardstock. Place a 3D Foam Circle Frame on top. Use your scissors to fussy cut the frame out.

Next, adhere the frame to a panel of cardstock and add a second 3D Foam Circle Frame around it. Stamp a friendship sentiment in the middle of the frame as shown.

Embellish the Card

Fill up the area around your frame by adding 3D Foam Circles and 3D Foam Stars, plus some additional E-Z Runner® Stars. Don’t be afraid to cut up your shapes with your scissors to fit your design and add balance.

Apply flock to your shapes. If you want a subtle look, use a flock of the same color as your paper panel. Want a bolder look? Use a bright color of flock!

Stamp, die-cut, and color in a couple of animal (or flower) stamps. Add them to your panel. If you have some leftover foam pieces, cut them up with your scissors and use them to mount your critters.

Complete your card by embellishing it with sequins. Don’t worry if you don’t have the same supplies I used to make my card. Simply change out the elements and use the supplies you have!

I hope you’re inspired to make a friendship card as I did!

Thanks for stopping by!

Teri Anderson

Creative Time: 60 mins
Skill Level: Intermediate

Materials Needed:
Scrapbook Adhesives by 3L®

E-Z Runner® Permanent Strips Refillable Dispenser

E-Z Runner® Stars Refillable Dispenser

3D Foam Circles White Mix

3D Foam Stars and 3D Foam Circle Frames White

Adhesive Dots Micro

Other: Papers: Lawn Fawn (All the Dots 6×6 Petite Prints Paper Pad); Stamps and Dies: Pretty Pink Posh (Thoughtful Greetings Stamp Set), Waffle Flower (Unicorns Stamp Set and Dies); Ink: Ranger Ink; Cardstock: Neenah; Sequins: Pretty Pink Posh; Flock: Stampendous!

Save to Pinterest!

A Friend Like You Card by Teri Anderson for Scrapbook Adhesives by 3L Pinterest

Visit our Website and Blog!
Sign up for our Newsletter so you never miss a contest or giveaway!

Intricate Bohemian Card

Posted on April 5, 2023 by Yvonne van de Grijp

Hi everyone, Yvonne here with an Intricate Bohemian-styled card. For this card, I used a thin metal cutting die with an intricate pattern which makes this card very easy to create. It can be a suitable way for beginner card makers. Isn’t it stunning? I would love to share how I made my Bohemian card, let me show you.

Intricate Bohemian Card by Yvonne van de Grijp for Scrapbook Adhesives by 3L

Creating the Top Card Panel

Start by die-cutting the intricate pattern from soft grey cardstock. Designer’s Tip: run the die-template several times through your die-cutting machine to make sure that the Bohemian pattern is perfectly cut. Then carefully remove the cardstock from the craft die. Next, use a paper trimmer to cut the paper to the desired size. Now apply 3D Foam Strips around the edges of the die-cut panel. Adhere 3D Foam Squares Micro White to the intricate parts of the die-cut panel.

Next carefully remove the liner from the 3D Foam Strips and 3D Foam Squares Micro White and adhere the die-cut onto a bright pink card panel. Designer’s Tip: tweezers are a great tool for precise positioning of the 3D Foam Squares Micro White. Using 3D foam products adds a beautiful lifting effect to your Bohemian card.

Making the Card Base

First, adhere the bright pink card panel onto a soft pink card panel using the E-Z Runner Grand Refillable Dispenser for affixing.

Then adhere to a white card base, again using the E-Z Runner Grand Refillable Dispenser for affixing.

Embellishing the Card

Now it’s time to embellish the Bohemian card. First, adhere a soft pink gerbera to the card. For adhering the flower I used Adhesive Dots Large.

For a finishing touch adhere a few rhinestones to the card. And voilá, your Bohemian card is ready to make someone feel very special to you. I hope you enjoyed this simple tutorial and wish you happy crafting

Yvonne van de Grijp

Creative Time: 45 minutes

Skill Level: Intermediate

Materials needed:

Scrapbook Adhesives by 3L®

E-Z Runner Grand Refillable Dispenser

3D Foam Strips

Adhesive Dots Large

3D Foam Squares Micro White

Other

Cardstock (White, Soft Pink, Bright Pink, Soft Grey); Etched dies (Sizzix: Tim Holtz Thinlits™ Doodle Art #2); Die-Cutting and Embossing Machine (Spellbinders Paper Arts®: Platinum 6 Machine); Mulberry Gerbera, Rhinestones; Scissors; Paper Trimmer; Tweezers

Save to Pinterest!

Intricate Bohemian Card by Yvonne van de Grijp for Scrapbook Adhesives by 3L Pinterest

More Than Enough Card

Posted on April 3, 2023 by Connie Mercer

Hi, Connie here with a mixed media More Than Enough Card to share. Use adhesive on the outside, along with stencils and stamps to create a wonderful dimensional card. Featuring the Adhesive Sheets 4×6, Metallic Transfer Foil Sheets Nature Colors, and 3D Foam Strips, it’s a great place to start. Let me walk you through a short tutorial.

More Than Enough Card by Connie Mercer for Scrapbook Adhesives by 3L

More than Enough Card Background

1. Distress card front on heavy mixed media cardstock using Distress Oxide inks (I went with blue tones).
2. Add portions of the Adhesive Sheets 4×6 randomly on the card front. Crumple up the bronze color from the Metallic Transfer Foil Sheets Nature.
3. Place over the exposed adhesive (color side UP). Pull up to reveal the wonderful results! Repeat until your desired look.
4. Now the card front is ready for stamps and stencils to be added. That’s the fun part!!

The next step is to add in the strips of ephemera with the Dual Tip Glue Pen and it works great!! Stamps and stencils were added. The sentiment was adhered with 3D Foam Strips.

A combination of Crafty Foam Tape 108ft and E-Z Runner® Grand Refillable Dispenser was used to adhere the front panel to the card base.

Designer’s Tip: Speckle the card front with acrylic white paint. Makes everything look better 🙂 :).

Thanks for stopping by!!!
Connie Mercer

Creative Time: 45 minutes
Skill Level: Intermediate

Materials Needed:
Scrapbook Adhesives by 3L®
Crafty Foam Tape 108′
3D Foam Strips
Metallic Foil Transfer Sheets/Nature Brown
Adhesive Sheets 4×6
E-Z Runner Grand Refillable Dispenser

HomeHobby™ by 3L
Dual Tip Glue Pen

Other: Stamps & Stencils: Darkroom Door; White Acrylic Paint; Ephemera (dictionary page); Material Swatch

Save to Pinterest!

More Than Enough Card by Connie Mercer for Scrapbook Adhesives by 3L Pinterest

Visit our Website and Blog!
Sign up for our Newsletter so you never miss a contest or giveaway!

Special Day Shaker Card

Posted on April 1, 2023 by Jamie Martin

Hi, Jamie here today! I am excited to share a shaker card made from a pretty paper pad. It’s easy to assemble using the right adhesives from Scrapbook Adhesives by 3L.

Special Day Shaker Card by Jamie Martin for Scrapbook Adhesives by 3L

Preparing the Card Base and Background

To start I splattered white ink on a dusty pink panel and mounted it to an off-white card using E-Z Dots® Permanent Refillable Dispenser. Note: I have my E-Z Dots® Permanent Refill in my red E-Z Runner® Refillable Dispenser. I love that I don’t have to order a whole new dispenser but just the refill. 🙂

Two coordinating papers from the pad were die-cut using a Nested Deckle Rectangle Die, both sheets are the same size. Layer them slightly askew and secure with the E-Z Dots® Permanent Refillable Dispenser.

Die-cutting the Tag and Window

Die-cut the floral paper using the Holiday Tags Die. Then cut with a smaller tag die from the set centered on the tag. I didn’t want the top part of the tag die-cut, so I placed the embossing plate at the bottom scallop of the die and ran it through my embossing machine. This will make only the bottom portion of the tag cut (see bottom right image). Place a ruler across the tag and use a craft knife to cut it off. Don’t forget to cut on a self-healing mat.

Preparing the Shaker Window

The decorative paper isn’t thick so I resolve that by die-cutting the tag with the cutout from white cardstock to make it sturdy when it pops up. Adhere the two pieces using the E-Z Dots® Permanent Refillable Dispenser. Die-cut the acetate using the larger die and attach it to the back of the tag using the E-Z Dots® Permanent Refillable Dispenser.

The Final Touches

Adhere the die-cut paper panels using the E-Z Dots® Permanent Refillable Dispenser. Place shaker bits in the center of the panel. Add the tag on top.

Adhere 3D Foam Circles White Mix on the back of the sentiment and pop it up in the center of the acetate. Cut the butterflies from one of the papers, slightly bend the wings, and glue them to the card with the Dual Tip Glue Pen. Lastly, pale pink enamel dots were placed on the card.

Thanks for Visiting!
Jamie Martin

Creative Time: 35 mins
Skill Level: Intermediate

Materials Needed:
Scrapbook Adhesives by 3L®
E-Z Dots® Permanent Refillable Dispenser
3D Foam Circles White Mix
3D Foam Strips

HomeHobby™ by 3L
Dual Tip Glue Pen

Other:
Decorative Paper – Kaisercraft Flowering Natives 6.5″
Acetate – Transparencies from an office supply store. (Make sure they are smooth).
Paint – Dr. Ph Martin’s Bleed Proof White
White Cardstock – PrintWorks Specialty Paper

Save to Pinterest!

Special Day Shaker Card by Jamie Martin for Scrapbook Adhesives by 3L Pinterest

Visit our Website and Blog!
Sign up for our Newsletter so you never miss a contest or giveaway!

Masculine HBD Card

Posted on March 29, 2023 by Judy Hayes

Hi, Judy here today to share a vintage-inspired masculine Happy Birthday Card. It features 3D Foam Frames and HBD letters cut from 3D Foam Creative Sheets Small Black covered with the black foil from the Metallic Transfer Foil Sheets Nature Colors. It’s a simple technique called Wear Your Adhesive on the Outside that adds a unique look.

Masculine HBD Card by Judy Hayes for Scrapbook Adhesives by 3L

Stamping and Inking Pieces

Stamp all images with Archival Black Soot ink and rub with Distress Vintage Photo and Black Soot inks.

These are the pieces needed:

Base Card from 4.25 x 5.5 inches ivory cardstock with a fold on the long edge. Stamp with various images around the edges.
Ivory panel stamped with an invoice image and trimmed to 3.25 x 4.5 inches plus black mat 3.75 x 4.625 inches.
Ivory strip 0.5 x 4.5 inches stamped with a metric ruler.
Image of men and pointing hand stamped and fussy cut out.

Assemble Framed Image

Carefully remove the sixth and the seventh largest frame from the 3D Foam Frames (counting the smallest rectangle as #1) and place them on the stamped invoice panel.

Peel the liners off. With the black foil from the Metallic Transfer Foil Sheets Nature Colors, press the foil (color side up) over the frames. Remove foil, check for coverage, and reapply foil as needed.

Trim the stamped men’s image as needed to fit inside the frame. Place Thin 3D Foam Squares Black Mix on the back side, and cut to fit as needed. Peel the liners and position the image inside the frame.

Use E-Z Runner® Ultra Strong Refillable Dispenser to apply adhesive to the back of the frame piece and attach it to the black mat. Apply adhesive to the ruler strip and fasten it along the bottom of the framed piece.

Secure to the card by applying the adhesive with E-Z Runner® Ultra Strong Refillable Dispenser on the back and place on the card.

Hand and HBD Letters

Place Thin 3D Foam Squares Black Mix on the back of the pointing hand, peel liners, position over the frame on the left corner, and press in place.

Die cut letters H, B, and D from 3D Foam Creative Sheets Small Black. Carefully remove letters from the dies, peel the liner from the back side, and fasten over the ruler image on the card. Peel liners from the front of letters, cover with the black foil from the Metallic Transfer Foil Sheets Nature Colors, rub to transfer foil (color side facing up), and peel away the foil.

Place three 3D Foam Squares Micro Black to the left of HBD, peel away liners, and cover with the black foil from the Metallic Transfer Foil Sheets Nature Colors. Make sure the foil color is facing up, press well to transfer the foil color, and peel the foil off to reveal the color!

Thanks for Visiting!
Judy Hayes

Creative Time: 25 mins
Skill Level: Intermediate

Materials Needed:
Scrapbook Adhesives by 3L®

E-Z Runner® Ultra Strong Refillable Dispenser

Thin 3D Foam Squares Black Mix

3D Foam Squares Micro Black

3D Foam Creative Sheets Small Black

Metallic Transfer Foil Sheets Nature Colors

3D Foam Frames

Other: Stamp: Stampers Anonymous Tim Holtz (Curiosities, Warehouse District, Visual Artistry); Ink: Ranger Ink (Distress Ink Vintage Photo, Black Soot, Tattered Rose, Archival Black Soot); Craft Dies: Sizzix (Tim Holtz Alphanumeric Bold); Ivory Index, Black Cardstock

Save to Pinterest!

Visit our Website and Blog!
Sign up for our Newsletter so you never miss a contest or giveaway!