Scrapbook Adhesives by 3L Crafty Power Blog

Hey Honey, Here’s a Quick and Easy Card

Posted on September 11, 2019 by Tracy McLennon

Welcome back, crafty friends! Tracy here, and today I have a Hey, Honey card that’s quick and oh SO easy to create. You’ll “Bee” happy to have a card to make ‘on the fly!’ Keep reading for all of the details.

Hey Honey Quick & Easy card tutorial by Tracy McClennon for Scrapbook Adhesives by 3L

Hey Honey, Let’s Make this Card!

Start the project with a card base that is 8.5×5.5, and fold in half. Then cut off a 1-inch piece from the front of the card base.

Next, cut the patterned paper pieces for the front. The yellow patterned paper is 5.25 x 3-inch, and the blue patterned paper is 5.25 x 1.25-inch. Add the blue strip using the trusty E-Z Runner® Petite Permanent Dots Refillable Dispenser and add the yellow patterned paper using Creative Photo Corners White.

The inside of the card is kept simple. Add the die cut sentiment and the bee patterned strip using the E-Z Runner® Petite Permanent Dots Refillable Dispenser.

The front of the card features Creative Photo Corners in White, which frame the yellow patterned paper. Add a line of E-Z Runner® Petite Permanent Dots to adhere the paper to the card front, so it can hold the weight of the die cuts.

For the perfect pop of dimension on my card, I grabbed the Thin 3D Foam Squares Black Mix and used it to add the vase, flower and bee die cuts. If you want one die cut higher than another, just double up the 3D Foam Squares. The Thin 3D Foam Squares Black Mix is the perfect go-to adhesive for this quick & easy card.

Just like that, my Hey Honey card is done! You could be out the door in under 15 minutes with a beautiful card!

Thanks so much for stopping by to check out my card tutorial!
Tracy

Creative Time: 15 minutes
Skill Level: Beginner

Materials Needed
Scrapbook Adhesives by 3L®
E-Z Runner® Petite Permanent Dots Refillable Dispenser
Creative Photo Corners White
Thin 3D Foams Squares Black Mix

Other
White Cardstock, Natural Burlap String, Patterned Paper and Die Cuts: Vicki Boutin (Wildflower and Honey Collection)

Love It. Pin It!

Hey Honey Quick & Easy card tutorial by Tracy McClennon for Scrapbook Adhesives by 3L -Pinterest

Visit our Website and Blog!
Sign up for our Newsletter so you never miss a contest or giveaway!

Be Spooky Acrylic Mini Album

Posted on September 9, 2019 by Shellye McDaniel

Hello! Shellye McDaniel here with a project that I love creating…Halloween mini-albums! Today I’m using a pre-cut acrylic album along with the fantastic adhesives from Scrapbook Adhesives to make a Be Spooky Acrylic Mini Album.

Be Spooky Acrylic Mini Album by Shellye McDaniel for Scrapbook Adhesives by 3L

Be Spooky Mini Instructions

To get started I prepped all of the base papers approximately 1-inch smaller than the acrylic base. I used Extreme Double-Sided Tape 1/2in to adhere the papers to the acrylic.

In decorating the cover, I used a strip of the Adhesive Sheets 4×6 inch on top of one of the sentiment strips and then added glitter! I also die-cut flowers from coordinating papers and assembled with 3D Foam Squares White Small.

On the above page I used Adhesive Dots Micro to add sequins to the cute accent page. The larger elements, such as the buttons, are secured with Adhesive Dots Small.

Alpha beads are all the rage, here I used them to spell out “yoself” using the Adhesive Dots Micro.

Next, there’s so much goodness to check out above image! I’ve used Extreme Double-Sided Tape 1/8in to adhere the pom pom trim and along the top seam of the flip card.

I love adding glitter dots so I randomly placed Adhesive Dots Mini, sprinkle the tops with glitter, and press to secure it in place before tapping off the excess.

In finishing, I fashioned a fun layered bow and then added to the ring. The album is all set and ready for spooky Halloween photos!

Thank you for stopping by!
Shellye

Creative Time: 2 Hours
Skill Level: Intermediate

Materials Needed
Scrapbook Adhesives by 3L®

HomeHobby by 3L®

Other
Patterned Paper, Stickers, and Chipboard: Crate Paper; Sequins and Enamel Dots: Doodlebug Design; Ribbon: Paper Mart

Love It. Pin It!

Be Spooky Acrylic Mini Album by Shellye McDaniel for Scrapbook Adhesives by 3L Pinterest

Click for more Halloween Projects & Tutorials on the Blog

Visit our Website and Blog!
Sign up for our Newsletter so you never miss a contest or giveaway!

Hello Pumpkin Card Tutorial

Posted on September 7, 2019 by Teri Anderson

Hi, everyone! Teri here today with a Hello Pumpkin card sure to get you in the mood for Fall. This card is easy to create, let me show you how!

Hello Pumpkin Card by Teri Anderson for Scrapbook Adhesives by 3L

Making the Hello Pumpkin Card Background

Start by cutting a panel of orange of cardstock and adhering it to scratch paper with E-Z Dots® Repositionable Refillable. Next apply E-Z Dots® Repositionable Refillable to the back of a stencil. Repositionable Adhesive holds strong until you remove it. You can reposition and restick without the need to apply more adhesive. It won’t damage paper, photos or other surfaces, and removes easily by rubbing with your finger.

Stenciling on a card, Hello Pumpkin Card by Teri Anderson for Scrapbook Adhesives by 3L

Set the stencil on top of your orange cardstock panel and sponge ink over it. Remove the stencil and rub off the repositionable E-Z Dots adhesive from it. Adhere the stenciled panel to a white cardstock base using E-Z Dots® Permanent Refillable Dispenser.

Die-cut two pumpkins and hearts from cardstock. Assemble the jack-o-lanterns and mount them to your card with 3D Foam Squares White Regular. This will give them some height and dimension. Secure the hearts to the card with E-Z Dots® Permanent Refillable Dispenser.

Stamp a sentiment on a strip of cardstock. Snip one edge with your scissors and adhere it to the card with 3D Foam Squares White Regular.

Adding Metallic Transfer Foil

Add a little glitz and glam to the card by randomly adhering Adhesive Dots Micro to the front. Once you’ve placed as many dots as you’d like on the card, you’ll want to rub some Metallic Transfer Foil onto them.

For easy application, cut a small piece of Metallic Transfer Foil Sheets Holographic Colors in silver and then place it over each dot, with the colored side facing up. Use your fingers to rub the foil until it entirely covers each dot.

Are you inspired by my card to make your own Halloween card? I’d love to see it! Leave a link for in the comments field so I can check it out, or tag us on social media #scrapbookadhesivesyb3l!

Happy creating!

Creative Time: 60 Minutes
Skill Level: Intermediate

Materials Needed
Scrapbook Adhesives by 3L®

Other
Buffalo Plaid Stencil by Paper Smooches; White Cardstock by Neenah Paper; Orange, Green, Yellow and Red Cardstocks by My Favorite Things; Face Off Stamp Set and Pumpkin and Heart Dies by Paper Smooches; Orange Ink Pad by My Favorite Things; Black Ink Pad by Ranger Ink

Love It. Pin It!

Hello Pumpkin Card by Teri Anderson for Scrapbook Adhesives by 3L -Pinterest

Click for more Halloween Projects & Tutorials on the Blog

Visit our Website and Blog!
Sign up for our Newsletter so you never miss a contest or giveaway!

Romantic Believe in You Card Tutorial

Posted on September 5, 2019 by Yvonne van de Grijp

Don’t you love romantic cards with a wonderful sentiment? I know I do! This ‘Believe in You’ sentiment is very special to me at the moment. My card is full of intricate and dimensional designs that include detailed die cuts. Some may hesitate in assembling such a card, but Scrapbook Adhesives by 3L® products make it easy. Let me show you how.

Romantic Believe in You Card Tutorial by Yvonne van de Grijp for Scrapbook Adhesives by 3L

Making Romantic Layers

Start by die-cutting and embossing the intricate romantic frame die cut from white cardstock. Cut off the small tabs on each side using scissors.

Cut a window opening in a rectangle patterned paper card panel. Make sure it is the same shape as the white frame die cut center. You should have enough space at the bottom to place a satin ribbon and bow.

Heighten the Layers

To lift the white frame die cut, use 3D Foam Squares White Regular Size and cut them into small strips with a craft knife. Careful place the die cut on top of the patterned window card panel. Be sure the openings are matched up before securing.

With a piece of white satin ribbon, adhere the ends to the back of the card panel using the E-Z Runner® Permanent Strips Refillable Dispenser.

Assembling the Card Base

Stamp the “Believe in You” sentiment with black ink, onto a rectangular piece of white cardstock that is smaller than the patterned card panel. Adhere the stamped sentiment behind the window opening using 3D Foam Squares White Regular Size.

Now fold a white card base and adhere the layered panel on top of it using the E-Z Runner® Permanent Strips Refillable Dispenser.

Embellishing the Card

First, fold a double satin bow and adhere to the card front using Adhesive Dots Large. Next, adhere mulberry flowers and leaves onto the card panel using Adhesive Dots Large. To adhere the stamens, I used the Dual Tip Glue Pen behind the leaves. Finish the card with self-adhesive pearls.

Voila! My romantic “Believe in You” card is ready.

Wishing you happy crafting!

Hugs,
Yvonne

Creative Time: 60 minutes
Skill Level: Intermediate

Materials Needed
Scrapbook Adhesives by 3L®

E-Z Runner® Permanent Strips Refillable Dispenser
3D Foam Squares White Regular Size
Adhesive Dots Large

HomeHobby by 3L®

Dual Tip Glue Pen

Other
Etched Dies and Die Cutting Machine: Spellbinders® Paper Arts (Grand Arch 3D Card Etched Dies Elegant 3D Vignettes by Becca Feeken, Platinum 6 Die-Cutting, and Embossing Machine); White and Blue Patterned Cardstock; Black Inkpad; Quietfire Design Rubber Stamp (The Best Thing); Mulberry Flowers and Leaves; Stamens; Satin Ribbon; Self-Adhesive Rhinestones; Scissors; Paper Trimmer

Love It! Pin It!

Visit our Website and Blog!
Sign up for our Newsletter so you never miss a contest or giveaway!

Sending Love Card with a Foiled Photo Corner Border

Posted on September 3, 2019 by Beth Pingry

I love to use Creative Photo Corners in out-of-the-box ways. Today I have a card we used as a make and take at a recent retailer event. See how I use our Metallic Transfer Foil to make a foiled Photo Corner border. Take a look at how FAST and EASY this is!

Sending Love Card with a Foiled Photo Corner Border by Beth Pingry for Scrapbook Adhesives by 3L

Creating a Foiled Photo Corner Border

Start with a standard sized cardstock card base, 5.5 wide x 4.25 inches with a top fold. Cut 1/2 inch off the front. For this example I kept the front a simple stamped sentiment to show off the foiled photo corner border technique.

When folded, the front will be 1/2 inch shorter than the back.

I’m using Black Creative Photo Corners, but you could use any of the colors we offer (Black, White, Ivory, Kraft, Gold, Silver). For the Metallic Transfer Foil, I’m working with the large silver pattern in the Holographic package. Any of the foil colors will work.

Cut two strips from the sheet of Creative Photo Corners. Fold the back liner, leaving the points covered by the liner, as shown above.

Apply the strip – not individual corners – to the inside front of the card. I found it’s easiest this way, the Creative Photo Corners stay perfectly lined up! Gently burnish the adhesive to the cardstock then pull away the liner.

Next add two corners from the second sheet, they fit perfectly across the card without the need to trim the edges.

Now you have exposed adhesive on the front of the card. Next up, Metallic Transfer Foil!

How to Add Metallic Transfer Foil

Place the Metallic Transfer Foil sheet on top of the exposed adhesive, the ‘pretty’ side should be facing up.
Gently burnish the foil onto the adhesive with your finger.
Peel away the foil sheet.

Notice the color of the foil, it IS silver but it reflects colors beautifully. The rainbow of color you see in the photos are reflections from various lights and objects in the rooms where I shot the photos.

Ah, so pretty! Let’s add more! A strip of Crafty Power Tape across the bottom works perfectly with Metallic Transfer Foil.

We call this technique Wear Your Adhesive on the Outside, and you could use glitter, embossing powder, flock, micro beads, or other media on the adhesive. Metallic Transfer Foil is FAST and EASY, with no other tools required, no drying time, and no mess!

Do the same thing, remove the liner from the Crafty Power Tape, add the Metallic Transfer Foil pretty side up onto the adhesive, burnish lightly, then remove the foil sheet.

The sentiment is ‘Sending Love’ so of course, I have to use a 3D Foam Heart. Place it on the card front, remove the liner, add the Metallic Transfer Foil pretty side up, gently burnish and remove the foil sheet.

Voila!…Oh wait, I didn’t stop there. I took a black fine tip pen (pro tip: use a ruler!) and outlined the tape line and 3D Foam Heart to mimic the black outline on the Creative Photo Corners.

This is really a quick and easy project, I hope you enjoy the detailed photos. Give it a try and tag us on Instagram, use #scrapbookadhesivesby3l.

Thanks for Visiting!

Beth Pingry

Creative Time: 15 Minutes
Skill Level: Beginner

Materials Needed
Scrapbook Adhesives by 3L®

Other:
Stamp: Lawn Fawn Grand Greetings; Kraft Cardstock; Black Ink; Black Fine Tip Pen

Love it! Pin it!

See More Creative Photo Corner Ideas

Click on the text at the bottom of each image to go to the blog post.

Visit our Website and Blog!
Sign up for our Newsletter so you never miss a contest or giveaway!

Apple Treat Bags Tutorial for Back to School

Posted on September 1, 2019 by Dana Tatar

Hi friends! Dana Tatar here today sharing a tutorial for sweet back to school apple treat bags. My daughter loves to bake and craft with me. The other day we baked sparkly apple granola bites and made personalized tags to share with her friends.

Apple Treat Bags for Back to School with Chalkboard Name Clips

The apple treat bags came with the baking mix, so I dressed up and I’m using some of my favorite go-to adhesives. A bright green ribbon and a small chalkboard name clip helped to give these sweet treats a special personalized touch.

A-peel-ing Embellishments

How to Use Repositionable Adhesive Dots to Seal Snack Bags

To begin, insert several apple bites or other sweet treats into the pre-made bag. Next, place an Adhesive Dot Large Repositionable on the backside of the bag. Finally, fold the top edge of the bag down over the Adhesive Dot and press to seal. This will keep the bag closed, but easy to open and reseal. Insert the treat into the apple print bag.

How to Adhere Ribbon with HomeHobby Extreme Double Sided Tape

Place your filled apple treat bags face down on a work surface. Apply Extreme Double-Sided Tape 1/8 inch around the top edge of the bag. Then peel off the red liner and press the ribbon onto the adhesive to secure the ribbon.

Mini Chalkboard Name Clips for Back to School Snack Bags

Personalize chalkboard clips with names using a white paint pen. Apply a small heart sticker for a fun pop of color.

Apple-y Ever After

How to Use Adhesive Dots to Attach Tags to Back to School Treat Bags

Fold down the top edge of the treat bag and secure with a clothespin clip. Next, apply an Adhesive Dot Medium to the underside of a sentiment tag. Tuck the tag under the clip and press to seal.

Sweet Apple Treat Bags for Back to School by Dana Tatar for Scrapbook Adhesives by 3L

Have fun passing these sweet treats out to friends. Give one to the teacher and move straight to the top of the class!

Thanks for Visiting!
Dana

Creative Time: 15 Minutes
Skill Level: Beginner

Materials Needed
Scrapbook Adhesives by 3L®

HomeHobby by 3L®

Extreme Double-Sided Tape 1/8 in.

Other
Apple Print Treat Bags; Ribbon (Maya Road); Chalkboard Clips (American Crafts); Sentiment Die-Cuts (Studio Calico); Small Heart Stickers; White Paint Pen (Ranger)

Love It. Pin It!

Visit our Website and Blog!
Sign up for our Newsletter so you never miss a contest or giveaway!

Layered Landscape Scene Card Tutorial

Posted on August 29, 2019 by Judy Hayes

Hello everyone! It’s Judy here today to share Layered Landscape Scene Card. This card tutorial has Thin 3D Foam Squares between the layers to create depth between the tree die cuts. Follow along to see how to make this card.

Layered Landscape Scene Card Tutorial by Judy Hayes for Scrapbook Adhesives by 3L

Inking the Background

Apply various green Distress Stains on two pieces of kraft cardstock. Make one darker and one lighter. Next die cut a tree line from each. Apply blue Distress Stains to kraft cardstock and add a touch of white stain. When dry, blend in touches of orange and yellow inks for sunset/sunrise. Cut the cardstock to 3.5 x 5.75 inches. Cut pieces of light brown card stock to make hills. Apply Distress Stains to each, and make some darker. Apply small amount of black along top edges for shadows.

Assemble the Layered Landscape Scene

These are the pieces ready to be assembled. Tip: Lay out your scene for placement of pieces. Use E-Z Dots® Repositionable Refillable Dispenser to temporarily hold the pieces in place. It’s easy to lift and move without damaging the papers.

Place Thin 3D Foam Squares Black on the back of the darker treeline. Cut Foam Squares in smaller pieces to fit on trees. Adhere the trees over the sky background, towards the left edge of the background paper. Add small hill pieces over each edge of treeline using Thin 3D Foam Squares. Use more Thin 3D Foam Squares on the other tree line so its below and to right of the first tree line.

Add Thin 3D Foam Squares Black to the backside of some of the landscape pieces and attach them across the base of trees. Stack two layers of Thin 3D Foam Squares at the lower edges to create more dimension.

Apply the final landscape piece in place. Use more Thin 3D Foam Squares Black along the bottom edge than I have shown in the photo.

Fasten 3.75 x 6-inch black cardstock to the front of the 4.25 x 6.5-inch olive card using E-Z Dots® Permanent Refillable Dispenser and E-Z Runner® Ultra Strong Refillable Dispenser. Use Ultra Strong on corners and Dots Permanent along sides and center. Next use E-Z Runner® Ultra Refillable Dispenser to apply adhesive to the back of the scene. It’s immediately tacky and strong and especially good to hold paper inked paper flat. Attach the scene over black cardstock.

Finishing Details

Stamp “Have a Great Day” verse with black ink on kraft card stock and trim to size. Cut a slightly larger piece of black card stock for a mat and adhere the layers together using E-Z Dots® Permanent Refillable Dispenser.

Place Thin 3D Foam Squares Black on back of verse. Stack two Thin 3D Foam Squares as needed to compensate for different levels of the landscape. Fasten verse in place.

Now you have a finished Layered Landscape Scene Card!

Thanks for Visiting!
Judy Hayes

Creative Time: 45 Minutes
Skill Level: Intermediate

Materials Needed
Scrapbook Adhesives by 3L®

Other
Etched Dies: Sizzix Tim Holtz Tree Line; Distress Stains: Peeled Paint, Forest Moss, Black Soot, Broken China, Faded Denim, Picket Fence; Distress Inks: Mustard Seed, Carved Pumpkin, Dried Marigold; Card Stock: Kraft, Light Brown, Black; WorldWin Cardstock: Olive; Verse Stamp; Ink: Imagine Crafts/Tsukineko Versafine Onyx Black

Love it! Pin it!

Layered Landscape Scene Card Tutorial by Judy Hayes for Scrapbook Adhesives by 3L Pinterest Image

Visit our Website and Blog!
Sign up for our Newsletter so you never miss a contest or giveaway!

Gingerbread Organizer Notepad

Posted on August 27, 2019 by Shellye McDaniel

Greetings! Shellye here today with a Christmas project to get you prepped for the upcoming holiday. Who can resist this adorable gingerbread organizer notepad? I promise you – it’s easy to create!

Gingerbread Organizer Notepad Instructions

To begin, I’ve taken two 5 x 7-inch legal notepads and sandwiched two together.

NOTE: Place the two pads so that the chipboard backing is on the front and back. I used Extreme Double-Sided Tape 1/2in along the top band to hold the pads together.

At the juncture of the two pads, I attached patterned paper to create a divider. To the divider, I added one of the largest Keepsake Envelopes. Here I can store tags, gift cards, etc.

To the chipboard covers, I attached pieces of the Adhesive Sheets 4 x 6 inch and then topped with patterned paper.

Embellishing the Cover

Now onto the cover! Mats of cardstock and patterned paper were added to the front with the Crafty Foam Tape White.

To embellish the cover, I made this cute Christmas tree made of Creative Photo Corners White. Cut a triangular from a piece of paper. Using the triangle as a guide, arrange the photo corners as shown in the image. Add Ric Rac trim to the tree with Extreme Double-Sided Tape 1/8in.

Place the gingerbread man from the 3D Foam Holiday Embellishment Kit on top of the tree. To embellish him, remove the top liner and sprinkle brown glitter on top. Press your finger into the glitter to secure and then tap off excess.

I love little notepads for jotting down recipes to try, decorating ideas and wish lists! This gingerbread organizer notepad is a quick and easy project for craft bazaars and gifts.

Thank you for joining me today!
Shellye

Creative Time: 45 minutes
Skill Level: Intermediate

Materials Needed
Scrapbook Adhesives by 3L®

Home Hobby by 3L®

Other
Patterned paper and sticker sentiment: Authentique Paper; Ric-Rac Trim: May Arts Ribbon; Brown Glitter: Doodlebug Design

Love It. Pin It!

Visit our Website and Blog!
Sign up for our Newsletter so you never miss a contest or giveaway!

Card with Hidden Gift Card Pocket

Posted on August 24, 2019 by Teri Anderson

Hi, everyone! Looking for a unique way to give a gift card to someone for their birthday? Make a card with a hidden pocket!

Card with Hidden Gift Card Pocket Tutorial by Teri Anderson for Scrapbook Adhesives by 3L

Making the Gift Card Pocket

Creating a card with a hidden pocket is so easy! Start by creating a card base. Cover the card with a patterned paper. Not a fan of patterned paper? Do what I did! Use a stencil to create a pattern with ink on cardstock.

Take a Keepsakes Envelope and cut a piece of patterned paper to fit inside it. Slide the patterned paper into the pocket. Then use a paper trimmer to cut away the pocket’s flap. Adhere the pocket onto your card.

Take a piece of double-sided tape and apply it onto the card, directly over the pocket. Remove the liner and burnish some foil onto it.

Now, apply one more piece of double-sided tape onto the card. Remove the liner and burnish some more foil onto it.

Before we go on with the card, here’s a quick tip for storing your sheets of Metallic Transfer Foil. Use a page protector for storage. Add a piece of cardstock or cardboard to the page protector and slide the foil sheets into it. I find this helps keep them nice, crisp and from getting damaged.

Finishing the Card

Now, back to the card. Stamp a sentiment on a strip of cardstock. You’ll also want to stamp, die-cut and color an image your card. Adhere them to the card with Thin 3D Foam Squares.

Complete your card by writing a message in the card and adding a gift card to your pocket. This pocket is also perfect for cash and gift certificates!

I’d love to see your cards with hidden pockets! Please leave a link to your project in the comments section so I can visit and leave you a little love!

Creative Time: 45 Minutes
Skill Level: Beginner

Materials Needed
Scrapbook Adhesives by 3L®

HomeHobby by 3L®

Extreme Double-Sided Tape 1/2in

Other
All About Plaid Paper Plaid by Jillibean Soup; White Cardstock by Neenah Paper; Peacock Before ‘n Afters by Lawn Fawn; Star Stencil by My Favorite Things; Black and Blue Ink Pads by Ranger Ink; Markers by Copic

Love it. Pin It!

Card with Hidden Gift Card Pocket Tutorial by Teri Anderson for Scrapbook Adhesives by 3L Pinterest Image

Visit our Website and Blog!
Sign up for our Newsletter so you never miss a contest or giveaway!

Give Thanks – Scrapbooking Fall with Dimension

Posted on August 21, 2019 by Tracy McLennon

Welcome back, scrapbooking friends! Tracy here, and today I have a little fall themed inspiration for you today. This layout features dimension and texture and all my go-to adhesives to get it done. Here are the details on this Fall Dimension layout.

Summer isn’t quite finished, but I am definitely looking forward to cooler weather and the changing of seasons. I created this layout with that love of fall in mind. Lots of distressed edges and warm tones sums up my Fall Dimension layout.

Scrapbook for Fall with Dimension by Tracy McLennon for Scrapbook Adhesives by 3L

Let’s Get Started

Start by adhering the distressed patterned paper layered background using the E-Z Runner® Ultra Strong Refillable Dispenser. The E-Z Runner® Ultra Strong Refillable Dispenser will make sure your layout’s base will be strong enough to hold heavier embellishments and layers.

I matted the photo in two layers of cream cardstock with distressed edges. Then adhered the layers together using E-Z Runner® Ultra Strong Refillable Dispenser and then added it to the layered background using Crafty Foam Tape White. The Fall Dimension layout is starting to shape up. Now it’s time for embellishing.

The resin frame in the image above would be one of the tricky things I added to this layout. I used Extreme Double-Sided Tape 1/8in to add the patterned paper sentiment to the back of the frame, and it worked perfectly. Then used two layers of 3D Foam Squares White Regular Size, to get it just above the matted photo.

Using Adhesive Dots Medium, I began adding the flowers and leaves around the matted photo and resin frame. Then used Adhesive Dots Mini for adding those slightly smaller embellishments like buttons and ribbon twists. These are the pieces that will make the Fall Dimension layout pop!

Thanks so much for stopping by!
Tracy

Skill Level: Intermediate
Creative Time: 45 minutes

Materials needed
Scrapbook Adhesives by 3L
Crafty Foam Tape White
E-Z Runner® Ultra Strong Refillable Dispenser
3D Foam Squares White Regular Size
Adhesive Dots Medium
Adhesive Dots Mini

Home Hobby by 3L®
Extreme Double-Sided Tape 1/8in

Other
Patterned Paper and Embellishment: Prima Marketing (Amber Moon Collection); Cream Cardstock; Edge Distresser Tool; Brown Ink; Ribbon; Buttons

Love It. Pin It!

Visit our Website and Blog!
Sign up for our Newsletter so you never miss a contest or giveaway!