Scrapbook Adhesives by 3L Crafty Power Blog

Organize Your Crafting Space with Adhesive Dots Large Repositionable

Posted on July 2, 2017 by Christine Emberson

Need help to organize your craft space? Hi everyone, it’s Christine here today with an idea to help organize your crafting space with a little help from Adhesive Dots Large Repositionable.

It doesn’t take long to amass lots of craft items and we all look to different ideas for storage. Clip boxes are ideal but I often forget as to what was inside each box. I definitely need a combination of Adhesive Dots Large Repositionable and labeling!

Organize your craft supplies by Christine Emberson

Let’s Organize!

First I typed out the contents of each box on my computer and printed it out onto cardstock. Then I die cut each label.

The labels are affixed with the Adhesive Dots Large Repositionable. This means I can move and re-stick my labels whenever I need. But don’t be fooled, these labels stay in place firmly until you want to move them, and then re-stick without additional adhesive.

How about embellishing your labels with cute little flowers? You can easily affix them with 3D Foam Squares White Small Size. Customize your craft space decor and stay organized – that’s the beauty of this idea 🙂

Now that all my boxes are labeled, it will definitely save me some time when crafting. Perhaps I should label my kids’ cupboards and they might put their stuff away! One can always wish! LOL!!

Thank you for stopping by today and don’t forget to check out the brilliant products on the website.

Products used:
3D Foam Squares, White Small
Adhesive Dots Large Repositionable
Others:
Dies: Spellbinders Paper Arts (Labels Four)
Ivory and Blue Cardstock; Printer; Gemstone.

Save

Baby Love Card using 3D Foam Stars

Posted on July 1, 2017 by Latrice Murphy

Hey there everyone! Latrice here today with a baby girl themed card for you. Today I was set on creating a simple card with 3D Foam Stars, patterned paper and a die cut. It seems like lately everyone is having babies around me. This mommy is all done, but it’s so fun to make cards for all my expecting friends.

First off I gathered the adhesives I wanted to use. I chose the E-Z Runner® Permanent Fine Adhesive Dispenser, HomeHobby Dual Tip Glue Pen, 3D Foam Stars and the Thin 3D Foam Squares – Mix White. I then chose a couple pink glitters for fun.

To give those stars some shimmer and to WEAR YOUR ADHESIVES ON THE OUTSIDE, peel the liner from one side off and press glitter into that exposed side. I did a couple in each shade of pink.

Next I chose some paper and cut those pieces down to the desired thickness. I trimmed any excess off after adhering them down with my E-Z Runner® Permanent Fine Adhesive Dispenser and the Thin 3D Foam Squares – Mix White.

After getting all that paper down I then adhered the die cut using the HomeHobby Dual Tip Glue Pen and finished the card off with the stars and some twine.

This was a fun card to create. You just have to love glitter! Send in a matching envelope and your soon to be my my friend will love it.

Scrapbook Adhesives by 3L® Supplies:
E-Z Runner® Permanent Fine Adhesive Dispenser
3D Foam Stars
Thin 3D Foam Squares – Mix White
HomeHobby Dual Tip Glue Pen
Other:
Authentique Paper; Silhouette Cut Shapes; Glitter and Twine from SRM Stickers; American Crafts Cardstock

Latrice

Best Day Ever Scrapbook Layout featuring Adhesive Lines and 3D Foam Squares

Posted on June 30, 2017 by Christine Meyer

Hi there crafty friends! Have you been doing some traveling this summer (or even spring) Maybe you even have some Disney pictures to capture!?! Christine joining you today with a Disney layout highlighting three of my favorite adhesives: Adhesive Lines, 3D Foam Squares, and E-Z Runner® Micro Refillable Dispenser! So let’s get started!

Disney Scrapbook Layout featuring Adhesive Lines, Foam Squares, and E-Z Runner by Scrapboook Adhesives by 3L

Throughout this layout I consistently used these three adhesives. The Adhesive Lines are amazing for attaching all those chipboard frames to the layout!

I like that these are an inch long and help speed up the process. And of course, you can’t go wrong with how strong they are!

Adding dimension in is always easier with 3D Foam Squares – White Mix. I primarily used the small ones because of the size of elements I was working with. Sometimes I needed even more height and in that case – I stacked two of the squares on each other.

Look at all that dimension!!! The E-Z Runner® Micro Refillable Dispenser also came into play as I used it to add my title onto the layout. I created a process video to walk you thru how I used all of these adhesives so visit my blog, CLICK: Magical Memories Day 5 Giveaway to check it out and giveaway details too!

Scrapbook Adhesives by 3L® Supplies:
Adhesive Lines
3D Foam Adhesive Squares – White Mix
E-Z Runner® Micro Refillable Dispenser
Other:
Patterned Paper, Stickers, Chipboard and Die Cuts: Simple Stories; Enamel Dots: Doodlebug Design

Save

Patriotic USA Tag Banner Tutorial

Posted on June 28, 2017 by Judy Hayes

Hello everyone! Today, I’m sharing a USA banner in honor of the 4th of July. I’ve used Crafty Foam Tape Black and 3D Foam Squares White Mix, 3D Foam Squares Black Mix to add dimension. Each pendant is a #8 manila tag turned so the hole is at the bottom where a star dangles.

Patriotic USA Tag Banner Tutorial by Judy Hays for Scrapbook Adhesives by 3L

Making the USA Tag Banner

To recreate this banner, first paint each tag white, then emboss and distress with stain.

Next fasten strip of navy card stock and star paper across bottom of tag which will be top for banner using E-Z Runner® Ultra Refillable Dispenser.

Cut scalloped open circles from dot paper and red cardstock. Use same inner circle and different size scallop circles. Fasten together using E-Z Dots® Permanent Refillable Dispenser. Distress with stain. Apply 3D Foam Squares White Mix to back. Fasten to tags.

Cut U S A letters from navy cardstock. Apply pieces of Crafty Foam Tape Black to back of each letter. Fasten each letter to tag.

Cut 3 different sizes of stars: 6 of navy, 3 each of red and dot paper. Fasten dot, red and navy stars together using E-Z Dots® Permanent Refillable Dispenser. Other navy star is for back. Apply 3D Foam Squares Black Mix to center of navy star for back (3D Foam Squares add dimension to star). Add Adhesive Dots Mini to each point. Fasten to layered star leaving one point unfastened.

Insert trim into tag hole. Fold and fasten ends together with Extreme Double-Sided Tape ¼ʺ. Wrap a piece of Extreme Double-Sided Tape ¼ʺ over trim end so tape is on both sides. Insert trim between points of star and fasten together over trim.

Finally, punch holes on each side of tag top. Thread cord through holes. Tie short ribbons between pendants and at each end. The banner is ready to display!

Have a happy 4th of July!
Judy

Scrapbook Adhesives by 3L®:
Crafty Foam Tape Black
Adhesive Dots Mini
3D Foam Squares White Mix
3D Foam Squares Black Mix
E-Z Dots® Permanent Refillable Dispenser
E-Z Runner® Ultra Refillable Dispenser

HomeHobby by 3L®
Extreme Double-Sided Tape ¼ʺ

Other: Authentique Paper Seafarer Eleven; Photo Play Let Freedom Ring; Spellbinders Circles, Stars, Alphabet dies; Sizzix Texture Fades; Tim Holtz Trimmings; Ranger Distress Stain; White Craft Paint; Stripe Ribbon, #8 Manila Tags; Cardstock: Navy, Red

Visit our Website and Blog!
Sign up for our Newsletter so you never miss a contest or giveaway!

Simple Gift Card Holder with 3D Foam Squares + Extreme Double-Sided Tape

Posted on June 26, 2017 by Latisha Yoast

Hello friends, Latisha with you today. I am sharing these cute little gift card holders. They were created with pattern paper, a die, Extreme Double Sided Tape and 3D Foam Squares. These also make perfect little envelopes for sweet notes, and what a great addition when giving someone flowers!

After the paper has been die-cut and scored, I applied Extreme Double-Sided Tape 1/8″ to the tabs. This adhesive will ensure that the envelope stays put – this tape is strong!

Next, I added 3D Foam Squares White Small to the backs of the die cuts. Just peel of the protector (liner) and place them on the front of the envelopes.

Here you go, a few “easy to make” gift card holders/little note envelopes! So cute and the perfect way to hide a note or to give a gift card.

Scrapbook Adhesives by 3L® Supplies:
3D Foam Squares White Small
Extreme Double Sided Tape 1/8″
Strong:
Patterned Papers and Die Cuts: Fancy Pants Designs
Etched Die: Lawn Fawn

SO FANCY Layout with E-Z Runner Ultra Refillable Dispenser

Posted on June 25, 2017 by Erica Houghton

Today I’m sharing a wedding themed scrapbook layout using the E-Z Runner® Ultra Refillable Dispenser with Adhesive Dots Mini and Adhesive Dots Small.

So Fancy Wedding Scrapbook Page

I adhered my paper layers and photograph using the E-Z Runner® Ultra Refillable Dispenser. The E-Z Runner® Ultra is a strong, permanent, double-sided adhesive in a refillable dispenser that applies a clear line of adhesive that is immediately tacky. Love how it grabs hold of those layers on my page! Using a combination of Dodz Adhesive Dots Mini and Dodz Adhesive Dots Small, I adhered my ephemera, enamel dots and other paper embellishments.

Here are a few close-ups:

So Fancy Wedding Scrapbook Page

Scrapbook Adhesives by 3L®:
E-Z Runner® Ultra Refillable Dispenser
Adhesive Dots Mini
Adhesive Dots Small
Other:
Paper & Stickers: Simple Stories
Titles: American Crafts and Heidi Swapp

Thanks for joining me today!
Erica Houghton

Use Your Stash Cards with Keepsake Envelopes and Adhesive Sheets

Posted on June 24, 2017 by Jana Maiwald-McCarthy

Hi everyone, Jana here with a new project! My scrapbook stash is growing around my desk top so I grabbed a few things and just start to play! I was a bit “out of order” for the last few weeks and these cards were perfect to activate my crafty brain again 😉

I tried the Adhesives Sheets 4 x 6″ for the first time and I really love how they work! You can’t see the adhesive on the vellum! yay! Also I used it on the big chipboard letter “D” – it looks a bit messy and it did not covered the complete Letter because I did not rub it completely over the letter. But I love the random placement of glitter! It stuck great to it!

To apply the vellum to the Adhesives Sheets 4 x 6″ you just need to peel the yellow liner off and press down the vellum back on the sticky part! You can use your punch or a die, it works great!

The little Keepsake Envelopes are one of my favorites! I love to add them to my projects. I added one to each of my cards to fill them with money, sequins or a personal note!

I really had fun putting them together and I am so happy that I finally found a spot for that adorable mermaid!!!

Here is my Use Your Stash Process Video for you to watch, see below!

Thanks for stopping by today

Scrapbook Adhesives by 3L® Supply:
E-Z Runner®Grand Dispenser
Keepsake Envelopes Mix
Adhesives Sheets 4×6″
Dual Tip Glue Pen
Other:
Crate Paper
Pink Paislee
Allison Kreft/Webster’s Pages
Jillibean Soup

Save

2017 Summer Coffee Lovers Blog Hop!

Posted on June 23, 2017 by Michele Kovack

We are excited to be participating and as a SUPER SPONSOR of 2017 Summer Coffee Lovers Blog Hop!! Coffee Lovers is a community of coffee-loving (or tea or cocoa) card makers. Visit the website that provides fresh brewed posts and seasonal flavored blog hops. Today Michele Kovack shares her fun java themed projects just for the occasion!

Coffee Break Card by Michele Kovack for Scrapbook Adhesives by 3L Summer17 Coffee Lovers BHop

Hi guys! I couldn’t resist making TWO cards for today’s hop! As a total coffee addict, I can’t seem to start my day without it! My first card uses some fun coffee stamps on a stitched heart. My projects always have to have dimension, so I am equally addicted to Crafty Foam Tape!

For the bottom layers with the plaid, yellow, and black paper, I used E-Z Squares® Refillable Dispenser. Super fast and easy to adhere everything! I wanted to add a little felt heart to the center, so I used Dodz Adhesive Dots Small.

My next card uses a large coffee image that was colored with colored pencils. Sparkle and dimension between the layers was created with my faithful friend, Crafty Foam Tape.

Next I added some coordinating patterned paper, a red bow, and a little red felt heart. The knot of the bow and the felt heart were secured using an Dodz Adhesive Dot Small.

Coffee Break Card by Michele Kovack for Scrapbook Adhesives by 3L Summer17 Coffee Lovers BHop

Scrapbook Adhesives by 3L® Supplies:
E-Z Squares® Refillable Dispenser
Crafty Foam Tape White
Dodz Adhesives Dots Small

Other:
Stamp: SRM; Paper: Lawn Fawn, Papertrey Ink; Felt Hearts: Etsy; Prisma colored pencils; Copic Markers; Glitter: Stickles; Ribbon: Papertrey Ink; Nuvo drops

For more inspiration and to link up, go to the Coffee Loving Blog

Join the fun by creating a coffee or tea themed project and link up! Participants are eligible to win prizes from over 70 Super Sponsors, including us! CLICK: 2017 Coffee Lovers Blog Hop Info Post

Connect with us!

Visit our Website and Bookmark our Blog!
Sign up for our Newsletter so you never miss a contest or giveaway!

blog purple

Save

Creating a Scrapbook Page with E-Z Dots® Permanent Refillable Dispenser and Crafty Foam Tape

Posted on June 22, 2017 by Stephanie Schütze

Hi there, it’s Stephanie here today with another scrapbook page, using my favorite E-Z Dots® Permanent Refillable Dispenser and Crafty Foam Tape White. Let me share a little tutorial with you.

I have a sea themed photo and used a wonderful matching paper collection from Authentique Paper called Seafarer.

1 – First I chose a pattern paper for my background. Then I picked different patterned papers for layering and deliberately cut freehand the squares because I love the imperfect look.

2 – I adhered the first layer of squares with the E-Z Dots® Permanent Refillable Dispenser and the second layer with Crafty Foam Tape White to create more dimension.

3 – Also I adhered my photo with Crafty Foam Tape White. For the perfect accent, I added a little ship that I created from Shipmate Die Set.

4 – Last step was to add stickers and embellishments. I used the sticker sheet of the same Seafarer collection.

I wish you all sunny creative days!

Thanks for visiting us today!
Stephanie

Scrapbook Adhesives by 3L® Supplies:
Crafty Foam Tape White
E-Z Dots® Permanent Refillable Dispenser
Other:
Patterned Paper: Authentique Paper (Seafarer Collection)
Etched Dies: Sizzix (Sizzix Thinlits Die Set – Shipmate)

Save

Ribbon Flower Tutorial with Adhesive Dots and Extreme Double Sided Tape

Posted on June 21, 2017 by Tracy McLennon

Hello crafty friends! Tracy McLennon here sharing a SUPER easy DIY Ribbon Flower embellishment tutorial. Confession: I am a ribbon lover with a huge collection of pretty ribbon of all kinds and love to incorporate into my papercrafting projects. You just need to have the right adhesives to work with. Today’s perfect adhesives are Extreme Double Sided Tape and Adhesive Dots Large.

Here is a snapshot of the products that I used to create my Ribbon Flower embellishment and card.

Step 1: Once you have chosen your ribbon, cut a piece that is about 12″ long. You may not need quite that much. But a little more is better than not enough.

Using my Extreme Double Sided Tape 1/8″ , I added a strip of the adhesive the full length of 1 edge of the ribbon. Press firmly to ensure the adhesive has attached the full length of the ribbon.

Step 2: Remove the protective strip from the Extreme Double Sided Tape 1/8″ and begin “pleating” the ribbon. These folds will stick to each other as you go. Continue until you see that you will have enough “pleating” to create the flower shape.

Step 3: Using a circle punch that will be smaller than the flower that you are creating, cut a piece of cardstock. The colour doesn’t matter, it will be completely hidden. Then I added a Adhesive Dot Large.

Take your “pleated” ribbon, flatten and shape the flower onto the Adhesive Dot Large. Using a large button with string tied through it, I added another Adhesive Dot Large and adhered it on top of the ribbon flower.

Step 4: You are ready to adhere your ribbon flower to any project you choose. For the simple card that I created I added the flower using a 3D Foam Square. The card was assembled using my E-Z Runner® Permanent Strips Refillable.

Thanks so much for stopping by and happy crafting!

Scrapbook Adhesives by 3L® Supplies:
E-Z Runner® Permanent Strips Refillable
Adhesive Dots Large
3D Foam Squares Black Regular
Extreme Double Sided Tape- 1/8″
Other:
Fancy Pants Designs: Corrugated Teal and Stickers; May Arts Ribbon and String; 1″ Circle Punch; White and Yellow Cardstock

Save