Scrapbook Adhesives by 3L Crafty Power Blog

Felt Flower Pot Home Decor

Posted on April 3, 2017 by Guest Blogger

I’m sharing a felt flower pot project that will make you smile 🙂 Hi all, I’m Guest Designer, Tami Mayberry back with you today. Did you know that Scrapbook Adhesives by 3L® products are not only outstanding adhesive product for paper but work great for fabric and felt? They’re perfect in home décor projects as well!

I love them for these applications for various reasons – they are quick and easy without the dry time of liquid adhesives or the mess (and burnt fingers!) of hot glue. I have decorated a small terra cotta pot to give you just a few ideas on how you can expand their usage.

Felt Flower Pot Home Decor by Tami Mayberry for Scrapbook Adhesives by 3L

How to Create Felt Flower

First die-cut your pink felt from a steel rule die that cuts 3D flowers.

Tami_April3_Photo1

To secure my felt flower, I will be using Dodz Adhesive Dots 3D. Perfect for decorating, they’re a strong and flexible adhesive. The unique patented single dot dispenser provides a touch-free application. See how to use them in a quick video below.

Leaving the clear backing in place, attach Dodz Adhesive Dots 3D to the center circle, as shown below.

Tami_April3_Photo2

Beginning at the outer end, wrap the die-cut around the end of a pencil.

Tami_April3_Photo3

Slide the wrapped flower off the end of the pencil; remove Dodz Adhesive Dots clear backing and press rolled flower onto tab, securing in place.

Tami_April3_Photo4

Your flower can now be shaped as desired and attached to your favorite project using Dodz Adhesive Dots 3D. For this flower, I flattened it out and trimmed a few layers from the center. Then I cut a pom-pom from a piece of trim and attached it to the flower center using Dodz Adhesive Dots 3D.

Tami_April3_Photo5

Next, paint the pot to desired color and make sure it’s dry. Attach Extreme Double-Sided Tape ⅛ʺ along the lower edge of pot rim. Remove the red liner and attach the lace trim.

Tami_April3_Photo6

And that’s it! This is a quick and easy project for the home, but you can fill it with treats to create the perfect party or wedding favor!

Felt Flower Pot Home Decor by Tami Mayberry for Scrapbook Adhesives by 3L

Supplies:

Other:

Painted mini terracotta pot
Pink felt
Pom-pom
Lace Trim
Flowers die

Save

Gift Box with Keepsake Envelopes

Posted on April 2, 2017 by Christine Emberson

Hi everyone, Christine here today with a quick and easy Spring themed gift box using a Keepsake Envelope.

CEmberson - Pillow Box 1

My gift box is a pillow box design. I positioned Crafty Power Tape to the side panels,and trimmed the edges to ensure a perfect seal.

CEmberson - Pillow Box 2

I printed a favorite quote to insert into a 2 x 2″ Keepsake Envelope, there are 10 in a pack – various sizes so great for many projects.

CEmberson - Pillow Box 3

Peeling off the backing I adhered it straight onto a die cut, super speedy!

CEmberson - Pillow Box 4

To affix my flower embellishment I used 3D Foam Squares White Small.

CEmberson - Pillow Box 5

To ensure the decoration is firmly affixed to the gift box I opted for Extreme Double Sided Tape, 1/2″. This is really strong and the red backing is easy to remove.

CEmberson - Pillow Box 6

The finished box – an ideal size for a gift card, jewelry or a handful of chocolates or candy.

CEmberson - Pillow Box 7

Pin this Gift Card Holder!

It’s a great idea for Mother’s Day or Wedding favors too!

Check out our quick video on Keepsake Envelopes:

Thanks for stopping by today and don’t forget to check out all the great products on the website.

Products used:
3D Foam Squares White Small
Crafty Power Tape
Keepsake Envelopes
Extreme Double Sided Tape 1/2in
Others:
Dies: Spellbinders® Paper Arts (Label 1 Plus, Pretty Petals)
Ivory, Blue and Pale Green Cardstock
Ivory Pearl

Creating a Senior High School Graduate Scrapbook Page

Posted on April 1, 2017 by Latrice Murphy

Hey everyone, it’s Latrice! Today is my very first post here on the Scrapbook Adhesives by 3L® Blog. I’m excited to share a 12 x 12″ scrapbooking layout with you. This layout is super special because it’s about my soon to be graduated nephew whose senior portraits I took. I had some images so of course I needed to make something. I’ll frame this in a shadow box to display at his graduation party this summer.

LatriceMurphy-Senior year layout-3

My first steps in creating a layout is deciding on the design. I will try to share the sketch I create along with a few detailed photos as well. Here are my photos and sketch for this one.

LatriceMurphy-Senior year layout-5

I chose to use the 3D Foam Squares along with the EZ Runner® Permanent Strips Refillable Dispenser for this layout. I love adding some interest to the page with the 3D Foam Squares.

LatriceMurphy-Senior year layout-4

For my layout I began by layering the solid cardstock. First yellow onto white and onto a navy blue. Below you can see that I added my two 4 x 6″ photos first. One was layered flat and the second was added partially covering the first photo with 3D Foam Squares.

LatriceMurphy-Senior year layout-6

I wanted something bold on this layout that was masculine and tied in with the Senior graduate theme. I found a great quote and die cut it on my Silhouette Cameo. I love how much space it takes up on the page and I was able to add more natural color to the layout. It fit perfectly with the textures and tones in the photos. I got out my sewing machine and lay my words out. In order to keep them from moving around

LatriceMurphy-Senior year layout-2

To finish the page off I found the perfect flair button with a heart that matched perfect. I then added two earthy buttons on either side using both the 3D Foam Squares and the EZ Runner® Permanent Strips Refillable Dispenser

LatriceMurphy-Senior year layout-1

Love how this turned out. Thank so much for reading along and checking out my first project. I’m really excited to share more with you all.

Latrice

Scrapbook Adhesives by 3L® Products used:
3D Foam Squares Mix, White
EZ Runner® Permanent Strips Refillable Dispenser
Other:
Cardstock (American Crafts); Flair Button (Lawn Fawn); Buttons (Jillibean Soup); Stickers (Simple Stories); Sewing Machine

Hoppy Easter Treat Bags Using 3D Foam Squares

Posted on March 29, 2017 by AJ Otto

AJ here today with an easy bag treatment for your Easter treats! Mini eggs are hands down my kids favorite Easter treat. We tend to stock up on them at this time of year. Throw a cute little tag on a bag filled with them and bam, happy kids!

Easter Treat Bags Tutorial by AJ Otto for Scrapbook Adhesives by 3L

One of my favorite tricks- when making little bows with twine, sometimes they come undone, I like them to have the perfect little loops that are even on each side.

AJOtto-EasterTreats-2

Add a small (teeny tiny!) drop of glue from the Dual Tip Glue Pen to the center to hold the knot in place to prevent any slippage.

AJOtto-EasterTreats-3

I started by adhering my circle die cut to the patterned paper with 3D Foam Squares.

AJOtto-EasterTreats-004

Using the smaller of the two sizes of 3D Foam Squares, I adhere my little bunny to the circle.

AJOtto-EasterTreats-5

To prevent placing adhesives where they aren’t needed and will end up hanging off the sides, I lay my sentiment down to see where I am going to place it. Add a few 3D Foam Squares and then adhere.

AJOtto-EasterTreats-6

Lastly, add a few sequins- With the Adhesives Dots Micro, you can stick the sequin to it and lay it on your project with the backing still on to map out where you want them on your project.

AJOtto-EasterTreats-7

Easter Treat Bags Tutorial by AJ Otto for Scrapbook Adhesives by 3L

These are easy enough to create multiples and give to your favorites on Easter!

Enjoy!
AJ

Scrapbook Adhesives by 3L® Products used:
Adhesive Dots Mini
Adhesive Dots Micro
3D Foam Squares Mix, White
Dual Tip Glue Pen
Other:
Spellbinders® Die; Authentique Patterned Paper Sequins; Cardstock; Twine; Ink; Stamps- Paper Smooches

Accent a Journal with Paint, Paper and Adhesive Sheets

Posted on March 28, 2017 by Judy Hayes

Hello everyone! Today I’m sharing a dollar store journal that I dressed up using Adhesive Sheets 6 x 12ʺ and Adhesive Dots Medium. Use little journals like this for gifts and it makes for both a gift and a card! Sometimes I write a personal note inside and add a gift card or cash. It would be perfect for a graduate!

Accent a Journal with Paint, Paper and Adhesive Sheets by Judy Hayes for Scrapbook Adhesives by 3L

Journal Step Outs

These are the supplies I used and note that I found the journal in a dollar store. Paint it with chalk paint and let it dry. Then I applied a layer of creamy wax and buffed it to show its texture.

Adhesive Sheet Application

For edge-to-edge adhesive coverage, I used Adhesive Sheets 6 x 12ʺ to apply to the back of the patterned papers and navy mat. It’s so easy to add the adhesive. Simply lift the adhesive liner, place the papers on the adhesive, place the liner back to cover, and rub well to transfer adhesive. Then peel the paper pieces off.

For the front, I adhered the verse to the navy mat and placed the layered verse on the journal cover. So Easy!

Ribbon Detail

I folded ribbon about in half and secured together with Adhesive Dots Medium. Then I added two more Adhesive Dots Medium on one side of the ribbon. I used a needle tool to tuck the ribbon into the spine at top of the book. Once the journal was closed, I pressed along the book spine to make sure the ribbon was attached well.

Finishing Details

On the inside of the covers, I fastened striped paper. It adds a finished and decorative touch to the journal.

All that’s left is to write a personal note and give this journal to someone special!

Thanks so much for visiting!
Judy Hayes

Creative Time: 40 minutes
Skill Level: Intermediate

Materials Needed:
Scrapbook Adhesives by 3L®
Adhesive Dots Medium
Adhesive Sheets 6 x 12ʺ

Other
Patterned Papers: Authentique™ Paper (Seafarer Collection); Paint and Wax: DecoArt® Americana® Decor™ (Chalky Finish Legacy and Crème Wax); Journal: Dollar Store; Navy Cardstock; Ribbon

Visit our Website and Blog!
Sign up for our Newsletter so you never miss a contest or giveaway!

Layered Congrats Card with 3D Foam Squares

Posted on March 26, 2017 by Latisha Yoast

Now that spring has officially sprung, it seems like this is the time of year when “congratulations” cards are much needed. With friends getting married, having a baby, graduating high school, etc… you can never have too many congrats cards on hand, especially popped with 3D Foam Squares White Regular!

Congrats Card by Latisha Yoast for Scrapbook Adhesives by 3L

Here’s how to create yours!

Die cut pieces and start to assemble them onto the card base.
Adhere the striped pink die cut to the card using 3D Foam Squares White Regular.
Adhere the yellow die cut using 3D Foam Squares White Regular.
Adhere the congrats die cut onto the white banner using E-Z Dots® Permanent Refillable.
Adhere the banner to the heart using 3D Foam Squares White Regular.
Apply the sequins to the card using Adhesive Dots Small.
Tie a bow to embellish.

Another look at the project…

0317LY_Congrats2

0317LY_Congrats1

For a masculine graduation card, skip the pink and go for more muted colors.

Thanks for stopping by!
Latisha

Materials Used:
3D Foam Squares White Regular
E-Z Dots® Permanent Refillable
Adhesive Dots Small
Others:
Lawn Fawn Dies
Sequins
Cardstock
Patterned Paper
Ribbon

Save

Wedding Layout with E-Z Runner Grand

Posted on March 25, 2017 by Erica Houghton

It’s Erica and today I’m sharing a wedding-themed scrapbook layout using the E-Z Runner® Grand Refillable Dispenser and Adhesive Dots Mini.

Wedding Layout by Erica Houghton for Scrapbook Adhesives by 3L

Creating the Wedding Layout

First cut a 12 x 12″ sheet of patterned paper to 11.5 x 11.5″. Center and adhere it to the 12 x 12″ patterned base sheet using the E-Z Runner® Grand Refillable Dispenser. With another sheet of patterned paper, cut to 10 x 10″, center and adhere it to the second layer using the E-Z Runner® Grand. Here I’m using the Double-Sided Tape Dispenser from the HomeHobby by 3L brand, the refills are interchangeable within either dispenser from either brand.

Now cut two 9.5 x 0.5″ strips, center and adhere it to the third layer using the E-Z Runner® Grand. Next, adhere a 3 x 4″ photo mat and other embellishments to the page using the E-Z Runner® Grand Refillable Dispenser.

Continue to add embellishments and adhere them using the E-Z Runner® Grand Refillable Dispenser. I also use Adhesive Dots Mini to stick my smaller embellishments like crystal and sticker hearts.

Here are a few close-ups:

Find more wedding inspiration on Top Wedding Ideas!

Scrapbook Adhesives by 3L®:
E-Z Runner® Grand Refillable Dispenser
Adhesive Dots Mini
Other:
Paper & Stickers: Moxxie
Alphabet Stickers: American Crafts
Wood Title: Heidi Swapp
Bow Die Cut: My Favorite Things
Button: Tim Holtz

Thanks for joining me today!
Erica HoughtonSave

Save

Embellishing Egg Cartons for Easter Decor

Posted on March 24, 2017 by Michele Kovack

How about a few embellished egg cartons?! Good morning! Michele here, and who doesn’t have a love affair with Target’s Dollar Spot? I can’t ever walk past without picking something up. Not only are the items super cute, but heck they are only a dollar! Or two. Or three.

That’s where I picked up these cute wooden bunnies. I knew I wanted to do something for Easter with them. Egg cartons and bunnies? Together? Yes please!

Embellishing Egg Cartons for Easter by Michele Kovack for Scrapbook Adhesives by 3L

How to Embellish Egg Cartons

Start by adhering the polka dot paper to the front of the egg cartons with E-Z Squares® Refillable. The bunnies were already sticky, so I adhered those directly onto the paper.

The gold trim bows were attached with the Dual Tip Glue Pen. I made a flower for each bunny and used Adhesive Dots Medium to attach it.

egg carton 3

Next I added gold cording and a sticker sentiment under the flower. I used the Adhesive Dots Medium to attach both of them. Adhesive Dots are double-sided, clear adhesive dots of glue. They have a strong and flexible adhesive and they come in a unique, patented single dot dispenser that provides touch-free application.

View a short video by clicking How to Use Dodz Adhesive Dots video below.

For the final touch, I added a tail – a fluffy pink pom pom using the Dual Tip Glue Pen.

egg carton2

egg carton box

Thanks so much for stopping by today!
Michele

Scrapbook Adhesives by 3L® Used:
Adhesive Dots Medium
E-Z Squares® Refillable Dispenser
HomeHobby by 3L®:
Dual Tip Glue Pen
Others:
Sticker: SRM; Bunny: Target; Flower: JustRite PaperCraft; Egg Carton and Gold Cording: Stampin Up!; Gold Trim: Michaels

How to Create a Tea Cup Treat Holder

Posted on March 23, 2017 by Guest Blogger

Hi all! Guest designer, Tami Mayberry, here again with another fun and easy project you can create with the help of your Scrapbook Adhesives by 3L® products. My son will be getting married this year so I have been working on various decoration and favor ideas. Today I share this adorable tea cup treat holder which is perfect for not only weddings but birthday parties, showers and gifts too.

Tea Cup Treat Holder by Tami Mayberry for Scrapbook Adhesives by 3L

Instructions:

Die-cut tea cup pieces from double-sided patterned paper.

Attach Extreme Double Sided Tape 1/4″ to right side of cup top along tab.

Tami_March23_Photo2

Remove backing; attach tab to opposite end creating a cone shape.

Tami_March23_Photo3

Attach Dodz Adhesive Dots Medium to die-cut circles. Fold down tabs; attach circles to inside and outside of cone shape securing tabs in place.

Tami_March23_Photo5

Attach Extreme Double Sided Tape 1/4″ to right side of cup base along tab.

Tami_March23_Photo6

Attach to opposite end creating cup base. Fold down tabs; attach Dodz Adhesive Dots Mini to each tab as shown.

Tami_March23_Photo7

Place cup top onto base; secure in place along tabs. Curl handle into an “S” shape attach to side of cup using Dodz Adhesive Dots Medium.

Tami_March23_Photo8

Attach Extreme Double-Sided Tape ⅛ʺ along edge of lace trim. Remove backing; attach lace to base of cup.

Tami_March23_Photo9

Fill with treats and there you have it!

Tami_March23_Photo10

Supplies:

Other:

Graphic 45 patterned papers
Tea Cup die
Lace Trim

Spring Card with Embellished 3D Foam Squares

Posted on March 22, 2017 by Stephanie Schütze

Hi there, it’s rainy and cold in Germany these days. So I decided to get in the spring by creating a spring card with fresh and light colors – thanks to a few 3D Foam Squares Mix White.

Stephanie_springcard_1 (1 von 1)

I used 3D Foam Squares Mix White on the outside of my card with embossing powder and glitter and some die cuts. My choice of colors are light blue and light and darker pink/rose.

Stephanie_springcard_2 (1 von 1)

On some squares I mixed my glitter and embossing powder together. These I liked most and used them for my card.

Stephanie_springcard_3 (1 von 1)

Then I added die cuts and adhered them with the E-Z Dots® Permanent Refillable Dispenser. I finished the card with alpha sticker, a rub on and a little flower sticker.

Stephanie_springcard_4 (1 von 1)

Spring is coming, for sure, but for now I have it on my card.

Thanks for visiting me today!
Stephanie 🙂

Supplies from Scrapbook Adhesives by 3L®:
3D Foam Squares Mix White
E-Z Dots® Permanent Refillable Dispenser